Rancho Suspension RS994065 front shock absorber for the 2018-2025 Jeep Wrangler and other vehicles controls wheel movement through a nine-position damping knob. This suspension shock absorber is a fourth-generation RS9000XL with integrated bottom mounts.
- Rancho RS9000XL series with a nine-position knob for adjustable damping and firmness on-road and off-road
- Nitrogen gas pressurized to 45 or 60 PSI to reduce air-to-oil mixture, damping fade and foaming
- Up to 2.38-in. tri-tube body (application specific) with all-weather fluid, for internal temperatures of -40 to 248°F
- Polyurethane rebound bumper and bushings plus a graphite-filled fluon-banded piston to absorb ride harshness
- Low-friction, self-lubricating seal that retains gas and oil, with a polyvinyl protective boot
- Dual component 2K paint finish for chip resistance
Quick facts
- Part: Rancho Suspension RS994065 shock absorber
- Also called: suspension shock absorber
- Fits: 2018-2025 Jeep Wrangler and other vehicles
- Position: Front
- Material: Steel body and cylinder
- Condition: New
This shock absorber suits stock or lifted trucks, SUVs and Jeeps that tow, haul or go off road. Fluid leaking down the body, a bouncy ride or nose dive under braking can mean a shock is worn. Before you replace the shock absorber, rule out worn bushings, springs or tire problems that can feel the same.
Fits
It fits the 2018-2025 Jeep Wrangler and the 2020-2025 Jeep Gladiator, which take one on each side of the front axle. This listing is one shock absorber; the other side of the front axle is normally done at the same time.
Specifications
Fit and size
- Position: Front; quantity per vehicle: 2
- Compressed length: 457.6 mm (18.02 in)
- Extended length: 639.9 mm
- Travel length: 182.3 mm (7.18 in)
- Body diameter: 54 mm (2.13 in)
- Bore size: 32 mm (1.26 in)
- Rod diameter: 16 mm (0.63 in)
- Dust shield diameter: 75.9 mm (2.99 in)
- Upper mount: Loop (Eyelet) Bushing and Sleeve, 1/2 sleeve ID x 2.3/4 sleeve OAL
- Lower mount: Loop (Eyelet) Bushing and Sleeve, 1/2 sleeve ID x 1.1/2 sleeve OAL
Build and materials
- Type: telescopic, tri-tube, gas-charged
- Damping adjustment: manual; adjustable compression and rebound
- Material: steel body and cylinder; chromed shaft
- Finish: painted
- Boot: included
- Condition: New
- Warranty: Rancho Limited Lifetime Warranty
- Country of origin: Australia
In the box
One shock absorber with its protective boot. Coil springs, spring seats and a bearing plate are not included.
Interchange: RS999065
Frequently Asked Questions
Does the Rancho RS9000XL RS994065 fit the 2020-2025 Jeep Gladiator?
Yes. Rancho Suspension RS994065 is a front shock absorber that fits the 2020-2025 Jeep Gladiator and the 2018-2025 Jeep Wrangler.
How much nitrogen pressure is in this Rancho shock absorber?
Rancho RS994065 is nitrogen pressurized to 45 or 60 PSI, which minimizes air-to-oil mixture and reduces damping fade and foaming.
Do coil springs come with this front shock absorber?
No. Coil springs, spring seats and a bearing plate are not included. The shock absorber comes with its protective boot.
What does the nine-position knob on the RS9000XL do?
The knob sets damping control and firmness for on-road or off-road use. Both compression and rebound are adjustable.
Is RS999065 an interchange number for this Rancho shock absorber?
Yes. RS999065 is listed as an interchange number for Rancho Suspension RS994065.
