Raybestos Brakes Wheel Lug Stud P/N:27892B (Pack of 5)
$42.99
(You save)
Keep your front wheel clamped tight to the hub with the Raybestos R-Line Wheel Lug Stud 27892B. It installs as a direct-fit replacement for the FRONT position on the 1994-1999 Dodge Ram 3500 and 1996-1999 Dodge Ram 3500 Van (all engines), giving the lug nuts a fresh, correctly threaded stud to torque against.
Left-hand thread: wheel stud thread direction is LH — counterclockwise — so plan your install and torque accordingly.
Thread size: 0.563 in.
Knurl diameter: 0.618 in.
Made in the United States; available only while supplies last.
A wheel lug stud is the knurled, press-fit stud that anchors the wheel to the hub flange; the lug nut threads onto it and clamps the wheel in place. Signs this stud may need replacing include stripped or damaged threads, a cross-threaded or seized lug nut, or a stud that has snapped off. Sold individually — the catalog lists one stud per application, so order the number your wheel requires and replace as directed by the vehicle service procedure.
It's an R-Line wheel lug stud — the knurled, press-fit stud that anchors your wheel to the front hub flange, with the lug nut threading onto it to clamp the wheel.
Which vehicles does it fit?
It's a direct-fit replacement for the FRONT position on the 1994-1999 Dodge Ram 3500 and 1996-1999 Dodge Ram 3500 Van (all engines). Check the Buyer's Guide tab to confirm your vehicle.
Is this a left-hand thread stud?
Yes. The wheel stud thread direction is LH (counterclockwise), with a 0.563 in thread size and a 0.618 in knurl diameter.
How many studs do I need?
It's sold individually and the catalog lists one per application, so order the number your wheel uses and replace them as directed by the vehicle service procedure.
When should a wheel lug stud be replaced?
Signs a stud may need replacing include stripped or damaged threads, a cross-threaded or seized lug nut, or a stud that has snapped off. Diagnose the cause before installing.
Write a Review
Raybestos
Raybestos Brakes Wheel Lug Stud P/N:27892B (Pack of 5)
Keep every wheel clamped down tight with the Raybestos R-Line Wheel Lug Stud 28892B. This threaded stud presses into the hub or axle flange so the lug nut can torque the wheel securely against the...
Keep the wheel clamped tight to the hub with the Raybestos R-Line Wheel Lug Stud 27768B. This front-position stud drops in as a direct-fit replacement for the listed applications, including the...
Keep your wheel clamped tightly to the hub with the Raybestos R-Line Wheel Lug Nut 6828N. It threads onto the wheel stud and draws the wheel against the mounting flange, holding it securely in place...
WARNING:
These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to
www.P65Warnings.ca.gov.
