Sachs Clutch Flywheel P/N:NFW1021
Sachs NFW6915 clutch flywheel for the 1988-1995 Toyota 4Runner V6 3.0L and other vehicles bolts to the crankshaft and gives the clutch a surface to grip. Its ring gear is what the starter engages to turn the engine over.
Clutch chatter or shudder, a slipping clutch or a grinding sound from the starter at start-up can mean the flywheel is worn. A worn clutch disc or pressure plate can be behind the same signs, so find the cause before you replace the flywheel.
It fits the 1988-1995 Toyota 4Runner V6 3.0L, the 1988-1995 Toyota Pickup and the 1993-1994 Toyota T100 V6 3.0L, with a single flywheel going in each one. The application is matched for OE form, fit and function.
Fit and size
Build and materials
Interchange: 1340565010
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Does the Sachs NFW6915 clutch flywheel fit the 1988-1995 Toyota Pickup?
Yes, the Sachs NFW6915 is listed for the 1988-1995 Toyota Pickup, with one flywheel per vehicle.
Is this SACHS clutch flywheel made of cast iron?
Yes, the Sachs NFW6915 is cast iron, with a flat friction surface that is not replaceable.
How many teeth does the ring gear on this flywheel have?
The ring gear has 120 teeth and a 305.4 mm outside diameter.
How many bolts hold this flywheel to the crankshaft?
Eight, through eight mounting holes of 10.4 mm. The clutch cover side has eight 8 mm holes and three 8 mm dowel pins.
Does 1340565010 match the Sachs NFW6915 clutch flywheel?
Yes. 1340565010 is an interchange number listed for the Sachs NFW6915 clutch flywheel.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.