Sealed Power Engine Connecting Rod Bearing Set P/N:6-2380CP 10
Sealed Power 2380CP connecting rod bearing for the 1964-1965 Ford Mustang 6-cylinder 2.8L, the 1964-1970 Mustang 6-cylinder 3.3L, the 1969-1973 Mustang 6-cylinder 4.1L and other vehicles gives the connecting rod a bearing surface on the crankshaft journal. As an engine connecting rod bearing, it sits between the rod and the journal and lets the rod turn on a film of oil.
A knock from the lower part of the engine, low oil pressure or metal in the oil can mean worn rod bearings. These signs alone do not prove the bearing is at fault, since a worn oil pump can also lower oil pressure. The bronze alloy material has less resistance to wear and corrosion than other bearing materials.
The 1966-1972 Ford Bronco 6-cylinder 2.8L, the 1973-1974 Bronco 6-cylinder 3.3L and the 1984-1985 Ford Tempo 4-cylinder 2.3L take it too, along with many other vehicles. Open the "Vehicles it fits" section to check your exact model and engine. Each engine takes one per cylinder: six on the 6-cylinder engines and four on the Tempo.
Fit and size
Build and materials
One connecting rod bearing pair.
Interchange: CB583P · ARC9DE6211A · C0DE6211C · C0DE6211D · C1DE6211A · C30E6211N · C30Z6211G · D00T6211A · D5DZ6211A · D7BE6211AA · D7BZ6211A · 712124 · 6B2121 · 6B2150 · 6150B · 6150CP · 7380CAP · VP871 · VPR871
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Does the Sealed Power 2380CP fit the 1984-1985 Ford Tempo 4-cylinder 2.3L?
Yes. Sealed Power 2380CP fits the 1984-1985 Ford Tempo 4-cylinder 2.3L, which takes four. Use the "Vehicles it fits" section to check any other car.
What is the lining of this rod bearing made of?
The lining is a bronze alloy over a steel back, with an overplate. This material has less resistance to wear and corrosion than other bearing materials.
What shaft and housing size does the 2380CP rod bearing fit?
Sealed Power 2380CP is a standard-size bearing for a 53.929-53.950 mm (2.1232-2.1240 in) shaft and a 56.871-56.891 mm (2.2390-2.2398 in) housing bore.
What does a Sealed Power 2380CP listing include?
This listing is one connecting rod bearing pair. Each engine takes one per cylinder, so order the number your engine needs.
Does the 2380CP bearing replace part number 6150CP?
Yes. 6150CP is one of the other numbers this bearing replaces, along with CB583P and 7380CAP. The full list is on the Interchange line.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.