Sealed Power Engine Connecting Rod Bearing P/N:3400CP
Sealed Power 4615P connecting rod bearing for the 1995-2005 Dodge Neon 4-cylinder 2.0L and other vehicles carries the rod on the crankshaft journal. The engine takes four, one per cylinder.
A knock from the lower engine, a low oil pressure warning or metal in the drained oil can mean worn rod bearings. This lining material resists wear and corrosion less than some other bearing materials. A weak oil pump, a faulty oil pressure sender or worn crankshaft journals can produce some of the same signs, so track down the cause before you order bearings.
The 1995-2005 Dodge Neon 4-cylinder 2.0L, the 2003-2005 Dodge SX 2.0 4-cylinder 2.0L and the 2000-2002 Chrysler Neon 4-cylinder 2.0L take this bearing, and so do many other vehicles. Look in the "Vehicles it fits" section for your exact model and engine.
Fit and size
Build and materials
Interchange: 4B1635A · 4728997 · CB1635A · CB1635P · BB215J · CR4195AM
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Does the Sealed Power 4615P fit a 1995-2005 Dodge Neon 4-cylinder 2.0L?
Yes. Sealed Power 4615P is listed for the 1995-2005 Dodge Neon 4-cylinder 2.0L. For another car, open the "Vehicles it fits" section to look up its model and engine.
What is the Sealed Power 4615P connecting rod bearing made of?
Sealed Power 4615P has a steel-backed bronze alloy lining with overplate. This material offers less resistance to wear and corrosion than some other bearing materials.
What oil clearance does this connecting rod bearing have?
The oil clearance is 0.0200-0.0610 mm, with a minimum of 0.0008 in. The housing bore is 50.9910-51.0060 mm and the standard shaft is 47.9910-48.0060 mm.
Is the Sealed Power 4615P engine connecting rod bearing sold as a pair?
Yes. Sealed Power 4615P is supplied as a pair, and the catalog lists a quantity of four per application, one for each cylinder.
Can a knocking noise from the lower engine mean worn rod bearings?
It can, along with a low oil pressure warning or metal in the drained oil. A shop can measure the bearing clearance against the 0.0200-0.0610 mm oil clearance spec.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.