Sealed Power Engine Oil Pump P/N:224-43706
Sealed Power 224-43681 oil pump for the 2009-2023 Chrysler 300 V8 5.7L and other vehicles pressurizes and circulates engine oil. This Sealed Power oil pump replaces a worn or failing pump to help restore oil flow.
A weak pump can show up as a low oil pressure light, a low pressure reading or engine noise, but low oil, an oil leak or a bad sensor can look the same. Start by checking the dipstick with the engine off and looking for oil drips where the vehicle was parked. A shop can test pressure with the engine running.
Beyond the Chrysler 300, this is a direct-fit oil pump replacement for the 2011-2024 Ram 1500 V8 5.7L and the 2009-2021 Jeep Grand Cherokee V8 5.7L. If your vehicle is not named here, look up your year and model in the "Vehicles it fits" section.
Fit and size
Build and materials
One oil pump with its pump cover and an O-ring; the engine takes one pump, and this listing holds one. Bolts, washers, the pickup screen and a drive shaft are not included, so plan on new bolts rather than reusing the old ones.
Interchange: 53021622BB · 53021622BE · 53021622BF · 53021622BG · 53021622BH · M452
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Will this work as a Chrysler 300 oil pump on a 2009-2023 model with the V8 5.7L?
Yes. Sealed Power 224-43681 fits the 2009-2023 Chrysler 300 V8 5.7L, and the engine takes one pump. Other vehicles it fits are in the "Vehicles it fits" section.
Is 224-43681 the right Jeep Grand Cherokee oil pump for the 2009-2021 V8 5.7L?
Yes. Sealed Power 224-43681 fits the 2009-2021 Jeep Grand Cherokee V8 5.7L, with one pump needed per engine.
Does this engine oil pump come with bolts or a pickup screen?
No. The pump comes with its pump cover and an O-ring, but bolts, washers and the pickup screen are not included.
What are the inlet size and mounting holes on the 224-43681?
The inlet size is 24 mm (0.95 in), and the pump has 4 mounting holes.
Are these pumps pressure tested at the factory?
Yes. Each pump is tested for pressure and flow under conditions designed to mimic real engine operation before it leaves the plant.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.