Help keep lubricant in and dirt and water out of the front wheel hub with the SKF wheel seal 17145. It is listed as a front-position replacement for the 1946-1950 Dodge WD15. See the Buyer's Guide tab for complete application and engine details.
SKF builds this seal from a tested design and materials chosen for correct fit, with construction aimed at shielding the wheel end from dirt and water.
SKF has long been a leader in the design and development of seals, and it invented the first integrated shaft seal in 1928. It has kept pioneering new designs and bonding techniques since then. Its seals are made to specific designs using premium materials, selected so each seal has the right properties for its application and environment. SKF seals have been on the road for more than a hundred years, keeping lubricants in and contaminants out.
Signs a wheel seal may need replacing: lubricant seeping from the hub, residue on the wheel or brake components, or dirt and water in the bearing area during service. If a failed seal is the cause, this part replaces it. It is good practice to fit a new seal whenever the hub is taken apart for bearing service.
Interchange: CHR 17145 · 71-17145
01730272051 · 1267 · 668479 · 975917145 · 145817145 · T1668 · 5975 · 27SS2769 · 17145CHR · 49237 · 329536 · CHR17145 · 7117145
This part cross-references / interchanges with the following part numbers:
What does the SKF 17145 wheel seal do?
It seals the front wheel hub, helping keep lubricant in and dirt and water out. Its case is deep drawn sheet steel, and its garter spring uses cold drawn steel wire for fluid retention.
What vehicle does this wheel seal fit?
It is listed for the front position on the 1946-1950 Dodge WD15. See the Buyer's Guide tab for full application details.
Do I need an SKF wheel seal puller to replace this seal?
This listing is for the seal itself. Follow the vehicle service information for the correct removal and installation method and tools.
What are signs a wheel seal may be failing?
Lubricant leaking from the hub, residue on the wheel or brake parts, or dirt and water in the bearing area may indicate a worn seal. Diagnose the source of the leak before replacing parts.
What part numbers does SKF 17145 interchange with?
It cross-references numbers including 71-17145, CHR 17145, 668479, 27SS2769 and 329536. See the Interchange line in the description for the complete list.
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
