Standard Ignition ALS2083 rear right ABS wheel speed sensor for the 2008-2014 Subaru Impreza reads wheel rotation speed and reports it to the ABS.
- Synthetic material made to withstand harsh operating conditions
- Harness carries location grommets and wire clips for mounting and routing
- Sealed connector for protection in harsh conditions
- Tested on vehicles for correct integration with electronic safety systems
Quick facts
- Part: Standard Ignition ALS2083 ABS wheel speed sensor
- Fits: 2008-2014 Subaru Impreza
- Position: Rear right
- Material: Synthetic
- Condition: New
A lit ABS warning light or ABS that behaves oddly can mean a wheel speed sensor has failed. Before replacing it, look over the sensor connector and wiring where you can see them, with the engine off, for damage or corrosion, and have a shop scan the stored codes.
Fits
This sensor is a direct-fit replacement for the 2008-2014 Subaru Impreza. This listing is one sensor for the rear right wheel, and that position takes one; the rear left sensor is a separate part.
Specifications
Fit and size
- Position: Rear right
- Quantity per application: 1
- Mounting location: Spindle
- Mounting type: Bolt mount, 3 bolt holes
- Harness length: 30.5 in (830 mm)
Build and materials
- Material: Synthetic
- Connector: Rectangular, male, 1 connector
- Terminals: 2 female blade terminals
- Condition: New
- Country of origin: China
In the box
One ABS wheel speed sensor with its harness, location grommets and wire clips. Mounting hardware and a dust shield are not included, so plan on new bolts rather than reusing the old ones.
Product information is for general reference and may contain errors. See our Disclaimer.
Frequently Asked Questions
Is the Standard Ignition ALS2083 the right ABS wheel speed sensor for the 2008-2014 Subaru Impreza?
Yes. Standard Ignition ALS2083 is the rear right ABS wheel speed sensor for the 2008-2014 Subaru Impreza, and that position takes one sensor.
Does the Standard Ignition ALS2083 come with mounting bolts?
No, mounting hardware and a dust shield are not included; the sensor arrives with its harness, location grommets and wire clips.
What connector does this rear right wheel speed sensor use?
This sensor has one rectangular male connector with two female blade terminals, and the harness is 30.5 in (830 mm) long. The connector is sealed for protection in harsh conditions.
What signs can a failing rear right ABS wheel speed sensor show?
Signs can include an ABS warning light, a traction control light or ABS that engages when it should not. A shop can read the stored codes to see which wheel's signal is the problem.
Where does the Standard Ignition ALS2083 mount on the car?
Standard Ignition ALS2083 mounts on the spindle with a bolt-mount design and three bolt holes. This listing is one rear right sensor; the rear left is ordered separately.
