Standard Ignition ABS Wheel Speed Sensor P/N:ALS50
Standard Motor Products
Standard Ignition ALS3182 front ABS wheel speed sensor for the 2020-2025 Nissan Versa and other vehicles senses wheel speed for the ABS.
An ABS warning light that stays on, or an ABS that stops working, can mean a wheel speed sensor has failed. Before you replace the sensor, rule out damaged wiring or a loose connector, since other faults can light the same warning.
The 2020-2025 Nissan Versa, the 2025 Nissan Kicks Play and the 2018-2024 Nissan Kicks all take this sensor, and so do other Nissan models. This listing is one sensor, and the vehicles above take two. If your Nissan is not named here, look it up in the "Vehicles it fits" section of this page.
Fit and size
Build and materials
One ABS wheel speed sensor with its wiring harness, grommets and wire clips. Mounting hardware and a dust shield are not included, so plan on new mounting hardware rather than reusing the old.
Interchange: ABS3182 · ABSA89 · 533553 · 479105FA0A · 479105RA0A
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Does the Standard Ignition ALS3182 front ABS sensor fit the 2025 Nissan Kicks Play?
Yes. Standard Ignition ALS3182 fits the 2025 Nissan Kicks Play, the 2020-2025 Nissan Versa and the 2018-2024 Nissan Kicks. For any other Nissan, look in the "Vehicles it fits" section.
Is a mounting bolt included with the ALS3182 ABS wheel speed sensor?
No. Mounting hardware and a dust shield are not included. The sensor comes with its wiring harness, grommets and wire clips.
What kind of connector does this ABS wheel speed sensor have?
Standard Ignition ALS3182 has one rectangular female connector with two male mini-blade terminals. The connector is sealed for protection in harsh conditions.
Which signs can show a front ABS wheel speed sensor has failed?
An ABS warning light that stays on, or an ABS that stops working, can mean a sensor problem. A shop can scan the ABS codes to confirm which part is at fault.
Is the ALS3182 a replacement for number 479105FA0A?
Yes. 479105FA0A is one of the numbers Standard Ignition ALS3182 cross-references to. The Interchange line on this page gives the others.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.