Standard Ignition ALS620 rear right ABS wheel speed sensor for the 1991-1996 Infiniti G20 reads wheel rotation and sends that signal to the ABS. The system uses it to see when one wheel slows faster than the others.
- Durable synthetic material made to withstand harsh operating conditions
- Harness with location grommets and wire clips for mounting and routing
- Tested on vehicles for correct integration with electronic safety systems
- Sealed square connector for protection in harsh conditions
Quick facts
- Part: Standard Ignition ALS620 ABS wheel speed sensor
- Fits: 1991-1996 Infiniti G20
- Position: Rear right
- Condition: New
A lit ABS warning light, or ABS and traction control that stop working normally, can mean a wheel speed sensor has failed. Before you replace this one, rule out a damaged harness, a loose connector or a fault elsewhere in the ABS. If this sensor is the cause, this rear right unit replaces it.
Fits
It fits the 1991-1996 Infiniti G20, which takes one at the rear right. This listing is one sensor for the rear right wheel; the left side of that axle is a separate part.
Specifications
Fit and size
- Position: Rear right
- Mounting location: Wheel
- Quantity per vehicle: 1
- Harness length: 36 in (914 mm)
- Number of bolt holes: 1
Build and materials
- Connector: 1 square female connector
- Terminals: 2 male blade terminals
- Condition: New
- Country of origin: Japan
In the box
One ABS wheel speed sensor with its harness, grommets and wire clips. Mounting hardware is not included, and the old hardware may not be reusable.
Interchange: ABS730 · ABSB10390 · 530231 · 4790062J00
This part cross-references / interchanges with the following part numbers:
ABS730, ABSB10390, 530231, 4790062J00, ALS620
Frequently Asked Questions
Is the Standard Ignition ABS wheel speed sensor ALS620 right for the 1991-1996 Infiniti G20?
Yes. Standard Ignition ALS620 is the rear right sensor for the 1991-1996 Infiniti G20, which takes one at that position; the rear left is a separate part.
Does the Standard Ignition ALS620 come with mounting hardware?
No. The Standard Ignition ALS620 comes with its harness, grommets and wire clips but not mounting hardware, and the old hardware may not be reusable.
How long is the harness on this rear right ABS wheel speed sensor?
The harness is 36 inches (914 mm) long. It ends in one square female connector with two male blade terminals.
Can a failing wheel speed sensor turn the ABS light on?
Yes, it can. A lit ABS light, or ABS and traction control that stop working normally, can be a sign, and a shop can read the stored codes and test the sensor.
Does the Standard Ignition ALS620 replace the 4790062J00 sensor?
Yes. 4790062J00 is one of the interchange numbers for this sensor, along with ABS730, ABSB10390 and 530231.
