Standard Ignition ALS999 rear right ABS wheel speed sensor for the 1996-2001 Acura RL tracks how fast the wheel turns for the ABS. It sends the signal the ABS module uses to detect wheel lockup.
- Durable synthetic material made to withstand harsh operating conditions
- Harness length of 940 mm (37 in) with location grommets and wire clips for mounting and routing
- Sealed connector for protection in harsh conditions
- Tested on vehicles for correct integration with electronic safety systems
Quick facts
- Part: Standard Ignition ALS999 ABS wheel speed sensor
- Fits: 1996-2001 Acura RL
- Position: Rear right
A lit ABS warning light or an ABS fault code can be a sign of a wheel speed sensor problem, though wiring, the tone ring or the module can set them too. Before replacing the sensor, look over the harness and connector for cracks, chafing or corrosion with the engine off. A shop can test the signal itself. If this sensor is the cause, it replaces the one at the rear right wheel.
Fits
Engineered specifically for Acura, this sensor is a direct-fit replacement for the 1996-2001 Acura RL, which takes one at the rear right wheel. This listing is one sensor; the rear left wheel takes its own.
Specifications
Fit and size
- Position: Rear right
- Quantity per vehicle: 1
- Harness length: 940 mm (37 in)
- Number of bolt holes: 4
Build and materials
- Connector: 1, square, male, sealed
- Terminals: 2, female blade
- Mounting location: Wheel
- Country of origin: China
In the box
One ABS wheel speed sensor. Mounting hardware is not included, so plan on new bolts.
Product information is for general reference and may contain errors. See our Disclaimer.
Frequently Asked Questions
Is the Standard Ignition ALS999 sensor right for the 1996-2001 Acura RL?
Yes. Standard Ignition ALS999 is the rear right ABS wheel speed sensor for the 1996-2001 Acura RL, and that car takes one at this position.
Does the ALS999 ABS sensor come with mounting bolts?
No. Mounting hardware is not included, so plan on new bolts. Location grommets and wire clips are already on the harness.
How long is the harness on this rear right wheel speed sensor?
The Standard Ignition ALS999 harness is 940 mm (37 in) long. It ends in a square male connector with two female blade terminals.
Which signs can point to a failing rear right wheel speed sensor?
An ABS warning light or an ABS fault code can be signs. A cracked or chafed wire or a damaged connector, seen with the engine off, is another.
What is the ALS999 rear right sensor made to withstand?
Standard Ignition ALS999 is made from a durable synthetic material to withstand harsh operating conditions, and its connector is sealed against them.
