Standard Ignition APS442 accelerator pedal sensor for the 2008-2013 Nissan Rogue and other vehicles reports pedal position to the ECU. The ECU uses that signal for throttle control.
- Sends pedal position data to the ECU for throttle control
- Pedal assembly included with the sensor
- Oval female plug-in connector with six male pin terminals
- Bolt-on attachment at the accelerator pedal
- Polyamide 6 material
Quick facts
- Part: Standard Ignition APS442 accelerator pedal sensor
- Fits: 2008-2013 Nissan Rogue and other vehicles
- Material: Polyamide 6
- Condition: New
A worn or failing pedal sensor can show up as a warning light, a delayed or uneven response to the pedal, or reduced engine power. Other faults can look the same, so before replacing it, check the connector with the engine off for bent pins, corrosion or damage, and have a shop scan the stored codes.
Fits
It fits the 2008-2013 Nissan Rogue and the 2014-2015 Nissan Rogue Select, and it is made to work with the electronic throttle control system on Nissan vehicles. Each takes one sensor, mounted at the accelerator pedal.
Specifications
Fit and size
- Mounting location: accelerator pedal
- Quantity per vehicle: 1
- Connector: 1 oval, female, plug-in
- Terminals: 6 male pins
- Attachment method: bolt on
Build and materials
- Material: Polyamide 6
- Pedal assembly: included
- Condition: New
- Country of origin: China
In the box
One accelerator pedal sensor with the pedal assembly. Mounting hardware and the mounting bracket are not included, and old fasteners may not be reusable, so plan on new ones.
Frequently Asked Questions
Is the APS442 a Nissan Rogue accelerator pedal sensor for the 2008-2013 model years?
Yes. Standard Ignition APS442 fits the 2008-2013 Nissan Rogue and the 2014-2015 Nissan Rogue Select, with one sensor per vehicle.
Does the APS442 pedal sensor come with the pedal assembly and mounting hardware?
Standard Ignition APS442 includes the pedal assembly. Mounting hardware and the mounting bracket are not included, so they need to be sourced separately.
How many pins does the APS442 connector have?
The oval plug-in connector is female and holds six male pin terminals. The listing is one sensor with a single connector.
Which driving signs can go with a worn accelerator pedal sensor?
A warning light, a slow or uneven throttle response, or reduced engine power can all be signs. A shop can read the stored codes with a scan tool.
What is the APS442 pedal sensor made of?
Standard Ignition APS442 is made of polyamide 6. It attaches by bolt-on mounting at the accelerator pedal.
