Standard Ignition CSP167 air bag clockspring for the 2010-2013 Ford Transit Connect carries the steering wheel's airbag and switch circuits to the vehicle wiring as the wheel turns.
- Maintains continuous electrical connection between the steering wheel and vehicle systems during rotation
- Copper alloy conductors with low resistive losses for good electrical conductivity
- High-grade materials and a sturdy design for the demands of professional service
- Four rectangular connectors with 18 blade and pin terminals
Quick facts
- Part: Standard Ignition CSP167 air bag clockspring
- Fits: 2010-2013 Ford Transit Connect
- Condition: New
A worn clockspring can show up as an airbag warning light, a horn that does not sound or steering wheel buttons that stop responding. A blown fuse, a faulty steering wheel switch or a damaged connector can be behind those symptoms too, so find the actual cause before buying. Airbag circuits are best tested by a shop.
Fits
It is a direct-fit replacement for the 2010-2013 Ford Transit Connect, which takes one clockspring.
Specifications
Fit and size
- Quantity per vehicle: 1
- Wire length: 5.5 in (139.7 mm)
- Wire quantity: 4
- Connector quantity: 4
- Terminal quantity: 18
Build and materials
- Connector shape: Rectangular
- Terminal type: Blade and pin
- Connector and terminal gender: Female and male
- Voltage: 12 V
- Condition: New
- Country of origin: Czech Republic
In the box
One clockspring. Hardware is not included, and old fasteners may not be reusable, so plan on new ones.
Interchange: CLS267 · ACSB10058 · CPI367 · 3M5Z14A664A · 3M5Z14A664AB · 3M5Z14A664B
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
CLS267, ACSB10058, CPI367, 3M5Z14A664A, 3M5Z14A664AB, 3M5Z14A664B
Frequently Asked Questions
Is the Standard Ignition CSP167 clockspring right for a 2010-2013 Ford Transit Connect?
Yes. The Standard Ignition CSP167 is a direct-fit clockspring for the 2010-2013 Ford Transit Connect, and that van takes one.
Does the CSP167 clockspring come with mounting hardware?
No. The Standard Ignition CSP167 is the clockspring only; hardware is not included, and old fasteners may not be reusable, so plan on new ones.
What kind of terminals does this clockspring have?
It has 18 blade and pin terminals across four rectangular connectors, and the connectors and terminals are a mix of female and male.
My horn and steering wheel buttons quit working. Could the clockspring be the cause?
Possibly. A worn clockspring can interrupt the horn, steering wheel controls and airbag warning light circuits. Airbag circuits should be tested by a shop rather than checked at home.
What wire length and voltage does the Standard Ignition CSP167 list?
The four wires are 5.5 in (139.7 mm) long, and the listed voltage is 12 V.
