Standard Ignition Air Charge Temperature Sensor Connector,Engine Coolant Level Sensor Connector P/N:S-697
Standard Motor Products
Replace a cracked, corroded or loose plug end with the Standard Ignition S-811 connector. Standard Ignition lists this part as an Alternator Connector, an Air Charge Temperature Sensor Connector and an Engine Coolant Level Sensor Connector. It is a direct-fit replacement for many vehicles, among them the 1989-1999 Chevrolet C1500 and 1990-1999 Chevrolet K1500. The part is listed for all engines on these applications.
An electrical connector joins a component to the vehicle's wiring harness so current and signals can pass between them. Over years of engine heat, moisture and handling, a connector housing can crack, its locking tab can break, or its terminals can corrode. Any of these can interrupt that connection.
Signs this connector may need replacing: a cracked or brittle housing, a broken locking tab, corroded or loose terminals, or an intermittent connection at the component. If a damaged connector is the cause, this part replaces it. Diagnose the circuit before replacing parts.
See the "Vehicles it fits" section for the full list of applications.
Product information is for general reference and may contain errors. See our Disclaimer.
What does the Standard Ignition S-811 connect?
It is an electrical connector that joins a component to the wiring harness. Standard Ignition lists it as an alternator connector, an air charge temperature sensor connector and an engine coolant level sensor connector.
Which vehicles does the S-811 fit?
It fits many vehicles, including the 1989-1999 Chevrolet C1500 and 1990-1999 Chevrolet K1500. See the "Vehicles it fits" section for the full list.
How many S-811 connectors does my vehicle need?
It varies by application. Most listings call for one, while some, such as the 1994 Buick Century, list two.
What are signs this connector may need replacing?
Signs include a cracked or brittle housing, a broken locking tab, corroded or loose terminals, or an intermittent connection. Diagnose the circuit first, because sensor or wiring faults can cause similar symptoms.
Is S-811 the same part as S811?
Yes. S-811 and S811 are the same Standard Ignition part number, written with and without the hyphen.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.