Standard Ignition TCS120 transmission control solenoid for the 1995-1998 Ford F-150 and other vehicles switches on command to control fluid pressure in the transmission.
Harsh or delayed shifts, or a transmission that stays in one gear, can mean an automatic transmission control solenoid is no longer actuating its valve. These signs alone do not prove the solenoid is the problem, since low transmission fluid is another common cause.
This solenoid is listed for a wide range of Ford models, led by the 1995-1998 Ford F-150, the 1995-1998 Ford F-250 and the 1998 Ford Expedition. It is a direct-fit replacement for these vehicles, with OE-matching resistance and inductance and OE-matching connectors and terminals. This listing is a single solenoid, and the fitment calls for one per vehicle.
Fit and size
Build and materials
One solenoid. The gasket, hardware, mounting bracket and wiring harness are not included, so plan on new fasteners and a new gasket if the job calls for them.
Interchange: TCS43 · TCS663 · F5TZ7G391A · F7TZ7G391AA · F81Z7G391BA
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is the Standard Ignition TCS120 the right transmission control solenoid for a 1995-1998 Ford F-250?
Yes. Standard Ignition TCS120 is listed for the 1995-1998 Ford F-250, as well as the 1995-1998 Ford F-150 and the 1998 Ford Expedition. For another Ford, look up your own truck or van in the "Vehicles it fits" section.
Does the TCS120 solenoid come with a gasket or wiring harness?
No. Standard Ignition TCS120 is one solenoid; the gasket, hardware, mounting bracket and wiring harness are not included.
How many terminals does the connector on this transmission control solenoid have?
The oval female connector has nine male pin terminals and attaches with a push-on fit.
Does the TCS120 replace Ford part number F7TZ7G391AA?
Yes. F7TZ7G391AA is on the Standard Ignition TCS120 interchange list, along with F5TZ7G391A and F81Z7G391BA.
Why does this solenoid have a stainless-steel filter screen?
The stainless-steel filter screen prevents contamination of the valve components in this transmission control solenoid.
No reviews yet — be the first to review this product.
Write a Review
Standard Motor Products
Standard Motor Products
Standard Motor Products
Standard Motor Products
Standard Motor Products
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
