Standard Ignition Automatic Transmission Control Solenoid P/N:TCS142
Standard Motor Products
Standard Ignition TCS14 transmission solenoid for the 1983-2001 Toyota Camry and other vehicles directs fluid flow inside the automatic transmission. Also known as a transmission control solenoid, it is an electrically operated valve that opens and closes on the control module's signal.
Harsh or delayed shifts, or a transmission that stays in one gear, can mean this solenoid is worn, though the wire harness or the control module may be behind them, so find the cause first. A 1983-2001 Toyota Camry takes one.
Listed for a wide range of Toyota models, including the 1983-2001 Toyota Camry, the 1999-2001 Toyota Solara and the 1994-1999 Toyota Celica. If your Toyota is not one of these, look up its year and model in the "Vehicles it fits" section.
Fit and size
Build and materials
One transmission solenoid with its wiring harness and hardware. Gaskets and a mounting bracket are not included.
Interchange: S9836 · TKS4 · TCS200 · 5202010000 · 8542032020 · 8542032021 · 8542032030 · 8542032130
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is the TCS14 the right Toyota Camry transmission solenoid for a 1983-2001 Camry?
Yes. Standard Ignition TCS14 is listed for the 1983-2001 Toyota Camry, and the "Vehicles it fits" section shows the other Toyota models it fits.
Does the TCS14 solenoid come with a wiring harness?
Yes. Standard Ignition TCS14 comes with one solenoid, its wiring harness and hardware. Gaskets and a mounting bracket are not included.
What connector does this transmission solenoid use?
It has two female rectangular connectors with blade and eye-loop terminals and a push-on attachment. The harness leads are 95 mm and 57 mm long.
What shifting problems can a worn transmission solenoid cause?
Harsh shifts, delayed shifts or a transmission that stays in one gear can mean the solenoid is worn. Have the transmission checked promptly rather than putting it off.
Why does this transmission solenoid have a stainless steel screen?
Each solenoid uses a stainless steel filter screen to prevent contamination of the valve components. Every unit also gets 100% end-of-line testing.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.