Give your transmission a solenoid built for positive valve actuation on command with the Standard Ignition Transmission Control Solenoid TCS198. It is a direct-fit replacement for the 2009-2011 Ford Crown Victoria, 2009-2011 Lincoln Town Car, 2009-2011 Mercury Grand Marquis, 2010 Lincoln Mark LT, 2011-2014 Ford E-150, 2011-2014 Ford E-250, 2011-2017 Ford E-350 Super Duty, 2011-2014 Ford F-450 Super Duty and 2013-2014 Lincoln Mark LT. See the Buyer's Guide tab for engine details by vehicle.
An automatic transmission control solenoid is an electrically operated valve. When the transmission control system energizes it, it opens or closes to route or vent fluid pressure inside the transmission.
As a global manufacturer, Standard Ignition maintains complete quality control throughout its manufacturing process.
Signs a transmission control solenoid may need replacing include harsh, delayed or erratic shifts, a transmission that stays in one gear, or a check engine light with a stored transmission code. Other faults can cause the same symptoms, so diagnose the transmission before replacing parts. If a failed solenoid is the cause, TCS198 replaces it.
Interchange: TCS121 · TCS741 · 9L3Z7G136A
This part cross-references / interchanges with the following part numbers:
What does the TCS198 transmission control solenoid do?
It is an electrically operated valve. When the transmission control system commands it, its precision-ground pintle moves to block or vent fluid pressure.
Which vehicles does TCS198 fit?
Fits the 2009-2011 Ford Crown Victoria, 2009-2011 Lincoln Town Car, 2009-2011 Mercury Grand Marquis, 2011-2014 Ford E-150, E-250 and F-450 Super Duty, 2011-2017 Ford E-350 Super Duty, and 2010 and 2013-2014 Lincoln Mark LT.
What are signs this solenoid may need replacing?
Signs include harsh, delayed or erratic shifting, a transmission that stays in one gear, or a check engine light with a transmission code. Other faults can cause these symptoms, so diagnose the transmission first.
Is it matched to the original solenoid?
Standard Ignition matches the solenoid's resistance and inductance to OE for proper fit, form and function.
What part numbers does TCS198 interchange with?
It interchanges with TCS121, TCS741 and 9L3Z7G136A.
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
