Standard Ignition TCS307 transmission control solenoid for the 2013-2018 Toyota RAV4 and other vehicles blocks or vents fluid pressure inside the transmission on command. Resistance and inductance are matched to OE for proper fit, form and function.
A worn or failing automatic transmission control solenoid can show up as harsh or delayed shifts or a transmission warning light, but those signs have other possible sources. Before replacing it, look the wiring connector over for damage or corrosion with the engine off and cool; a shop can test the solenoid itself.
The 2013-2018 Toyota RAV4 takes one solenoid. This transmission control solenoid is also a direct-fit replacement for the 2008-2017 Toyota Camry and the 2009-2019 Toyota Highlander, along with many other Toyota, Lexus and Scion models. Look up your own year and model in the "Vehicles it fits" section further down.
Fit and size
Build and materials
One transmission control solenoid. Gaskets, hardware, a mounting bracket and a wiring harness are not included, so plan on new gaskets and hardware if your job calls for them.
Interchange: TCS230 · TCS850 · 3529033040
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Does the Standard Ignition TCS307 fit the 2013-2018 Toyota RAV4?
Yes. Standard Ignition TCS307 fits the 2013-2018 Toyota RAV4 and the 2008-2017 Toyota Camry. For other cars, look up your year and model in the "Vehicles it fits" section.
Does the TCS307 transmission control solenoid come with a wiring harness or gaskets?
No. Standard Ignition TCS307 is one solenoid only. Gaskets, hardware, a mounting bracket and a wiring harness are not included.
What kind of connector does this transmission control solenoid have?
It has one rectangular female connector with two male blade terminals, attached push-in. The solenoid has no wire or harness of its own.
What are the warning signs of a bad transmission control solenoid?
Harsh or delayed shifts and a transmission warning light can be signs, though other faults produce them too. A shop can test the solenoid's resistance and operation.
What is the filter screen on this solenoid made of?
The filter screen is stainless steel. It is there to prevent contamination of the valve components, and the winding is 100% copper.
No reviews yet — be the first to review this product.
Write a Review
Standard Motor Products
Standard Motor Products
Standard Motor Products
Standard Motor Products
Standard Motor Products
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
