Keep high-voltage spark headed to the right cylinder with the Standard Ignition Distributor Cap JH-67. It is listed as a replacement for a wide range of Dodge, Eagle, Ford, Hyundai, Mazda, Mitsubishi and Plymouth applications. These include the 1974-1984 Dodge Colt, 1972-1982 Ford Courier and 1984-1994 Mitsubishi Mighty Max. See the "Vehicles it fits" section for the full list of applications and engine details.
The distributor cap covers the distributor and carries the ignition coil's high-voltage charge from the spinning rotor to each spark plug wire terminal. Standard Ignition is a global manufacturer of original equipment ignition products, and it maintains complete quality control across the manufacturing process, from components to the finished product.
Signs a distributor cap may need replacing include cracks in the cap, carbon tracks, and burned or corroded terminals inside. Engine misfire, hard starting or rough running can also occur when a cap is worn. These symptoms can have other causes, so inspect the ignition system before replacing parts. If a worn cap is the cause, the JH-67 replaces it.
Interchange: 10-0119
100119 · 74920234 · C563 · 1235999202 · 1235999203 · MD602597 · MD602756 · JA920 · EP706 · D27Z12106B · 12339176 · 89057243 · 12011000 · 2711021060 · 2712011000 · DC82 · DC86 · DC90 · 032424310 · 03242431091 · H61224310 · H61224730 · T232543871 · EP706SB · 4809 · JH67T
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
What does a distributor cap do?
It covers the distributor and routes the ignition coil's high-voltage charge from the rotor to each spark plug wire terminal, so each cylinder receives its spark.
Which vehicles does the Standard Ignition JH-67 fit?
Its listed applications include the 1972-1982 Ford Courier, 1974-1984 Dodge Colt and 1984-1994 Mitsubishi Mighty Max. See the "Vehicles it fits" section for the full list of applications and engine details.
What is the JH-67 distributor cap made of?
Standard Ignition makes its distributor caps from high dielectric strength, glass/mineral reinforced polyester resin. The material is intended to reduce carbon tracking and resist electrical breakdown.
What are signs of a failing distributor cap?
Possible signs include cracks, carbon tracks, burned or corroded terminals, misfire, hard starting or rough running. These can have other causes, so diagnose the ignition system before replacing parts.
What part numbers does the JH-67 interchange with?
It cross-references numbers including 10-0119, MD602597, MD602756, D27Z12106B, EP706 and DC82. The full list appears on the Interchange line in the description.
No reviews yet — be the first to review this product.
Write a Review
Standard Motor Products
Standard Motor Products
Standard Motor Products
Standard Motor Products
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
