Standard Ignition Door Lock Actuator P/N:DLA-54
Standard Motor Products
Standard Ignition DLA-496 rear left door lock actuator for the 2006-2007 Toyota Highlander moves the door's lock mechanism when you use the power locks. It takes the signal from the lock switch or remote and turns it into lock and unlock movement.
A rear door that will not lock or unlock from the switch or remote, or a buzz or grind from inside the door, can mean the actuator is wearing out. These signs alone do not prove the actuator is at fault, since a blown fuse can also leave a door unresponsive.
This actuator is a direct-fit replacement for the 2006-2007 Toyota Highlander.
Fit and size
Build and materials
One rear left door lock actuator with its latch. This listing holds one actuator, and the rear left of the 2006-2007 Toyota Highlander takes one; the other side is its own part, ordered separately. The wiring harness, mounting hardware and activation rods are not included, so plan on new bolts, as the old ones may not be reusable.
Interchange: DLA1219 · DLA404 · DLA719 · 6914051010
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is the Standard Ignition DLA-496 the rear left door lock actuator for the 2006-2007 Toyota Highlander?
Yes. Standard Ignition DLA-496 is a rear left door lock actuator for the 2006-2007 Toyota Highlander. The right side is a separate part.
Does the Standard Ignition DLA-496 actuator come with a wiring harness or bolts?
No. The DLA-496 comes with its latch, but the wiring harness, mounting hardware and activation rods are not included.
What kind of connector does this door lock actuator use?
It has one rectangular female connector with four male blade terminals.
How can I tell if a rear door lock actuator is going bad?
One door may not lock or unlock from the switch or remote, or you may hear a buzz or grind inside the door while the other doors work normally. A shop can test the circuit.
Does the Standard Ignition DLA-496 meet any safety standard?
Yes. The DLA-496 is designed to meet Federal Safety Standards to reduce the possibility of passenger entrapment, and its housing is corrosion-resistant.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.