Standard Ignition Door Lock Actuator P/N:DLA1472
Standard Motor Products
Standard Ignition DLA1442 door lock actuator for the 2010-2014 Chevrolet Tahoe and other vehicles locks and unlocks the door latch when the power locks are used.
A door that will not lock or unlock from the power switch, a lock that works only some of the time, or a buzzing inside the door can mean the actuator is wearing out. Before you replace it, look over the door-side wiring and connector with the engine off for frays, corrosion or a loose plug, because a wiring fault can look like a bad actuator.
The 2010-2014 Chevrolet Tahoe, the 2010-2014 GMC Yukon and the 2010-2014 Chevrolet Suburban 1500 all take this door lock actuator, as do other Chevrolet, GMC and Cadillac models. If your SUV is not one of those three, find your year and model in the "Vehicles it fits" section.
Fit and size
Build and materials
One door lock actuator with its latch and wiring harness; the fitment calls for one per application. Mounting hardware and activation rods are not included, so plan on new fasteners, as the old ones may not be reusable.
Interchange: DLA11442 · DLA907 · DLA121442 · 20821239 · 23190708 · 25937660
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is this the right Chevy Tahoe door lock actuator for a 2010-2014 model?
Yes. Standard Ignition DLA1442 fits the 2010-2014 Chevrolet Tahoe, and the fitment calls for one. For another model, look in the "Vehicles it fits" section.
Is this the door lock actuator for the 2010-2014 GMC Yukon?
Yes. Standard Ignition DLA1442 is listed for the 2010-2014 GMC Yukon, one actuator per application.
Does this door lock actuator come with the latch and wiring harness?
Yes. It includes the latch and a 22 in (558.8 mm) wiring harness. Mounting hardware and activation rods are not included.
What kind of connector does the DLA1442 have?
It has one rectangular male connector with 10 female terminals of the blade and pin type.
Why would one power door lock stop responding while the others still work?
The actuator in that door can be one reason, along with the wiring or connector. A worn actuator may buzz or lock only some of the time.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.