Standard Ignition Engine Coolant Temperature Sender P/N:TS-111
$25.99
(You save)
Keep a clear read on engine coolant temperature with the Standard Ignition Engine Coolant Temperature Sender TS-111. This is a temperature sender for use with a gauge — it threads into the engine's coolant passage, reads coolant temperature, and passes the signal to the dashboard temperature gauge so you can monitor how hot the engine is running. It drops in as a direct-fit replacement across a wide range of 1980-1991 Nissans, including the 1984-1986 200SX, 1989 240SX, 1980-1986 720, 1986-1987 D21, and 1982-1987 Sentra (All engines) — see the Buyer's Guide tab for the full application list.
Direct-fit connection: M12-1.25 threaded body with a single male blade terminal and a round, male plug-in connector; bolts on in place of the original sender.
Gauge signal: senses engine coolant temperature and transfers the reading to the instrument-cluster temperature gauge.
Built to OE standards: from a global manufacturer of original-equipment ignition products that holds quality control from componentry through finished part, using robust design and high-grade materials for the service professional.
If a failed sender is the cause of an inaccurate, erratic, or dead temperature gauge, this unit replaces it — diagnose the circuit before ordering. Country of origin: Mexico.
It is a coolant temperature sender for use with a gauge: it senses engine coolant temperature and sends the signal to the dashboard temperature gauge so you can monitor engine heat.
Which vehicles does it fit?
It's a direct-fit replacement for many 1980-1991 Nissans (All engines), including the 200SX, 240SX, 720, 810, D21, Maxima, Pathfinder, Sentra, Stanza and more. Check the Buyer's Guide tab for the full list.
What are signs my coolant temperature sender may need replacing?
An inaccurate, erratic, stuck, or dead temperature gauge can be a sign. Other faults can cause the same symptoms, so diagnose the sender and its circuit before replacing.
How does it install and what's the thread size?
It has an M12-1.25 threaded body that bolts on into the coolant passage, with a single male blade terminal and a round male plug-in connector. Consult the service information for torque specs.
What other part numbers does this sender replace?
It interchanges with WT517, 8224, TU100, TS6012, 19022029, 89054656, 17-1313 (171313), AM0118501, AM1518510 and 2508089902. Its own manufacturer part number is TS-111.
Write a Review
STANDARD MOTOR PRODUCTS
Standard Ignition Engine Coolant Temperature Sender P/N:TS-111
Keep a clear, accurate read on engine temperature with the Standard Ignition Engine Coolant Temperature Sender TS-362. This "with gauge" sender is a direct-fit replacement across a range of...
WARNING:
These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to
www.P65Warnings.ca.gov.
