Standard Ignition Engine Cooling Fan Switch,Engine Cooling Fan Temperature Switch P/N:TS-579
Standard Motor Products
Standard Ignition TS-412 cooling fan switch for the 1990-1992 Infiniti Q45 and other vehicles closes an electrical contact at a set temperature to signal the fan controller. It is made to switch at the correct temperature so the cooling system keeps working properly.
A worn engine cooling fan switch can show up as a fan that never starts or runs all the time, or as an engine running hot. These signs alone do not prove the switch is the problem, since a failed fan relay is another common cause.
This cooling fan switch is a direct-fit replacement for the 1990-1992 Infiniti Q45, made to the exact resistance and temperature ratings of the OE. It is also the switch for the 1990-1992 Infiniti M30. The 1990-1992 Infiniti Q45 takes one.
Fit and size
Build and materials
One cooling fan switch with its wiring harness. Mounting hardware and mounting brackets are not included.
Interchange: TFS626 · FS180 · 2158860U00 · 21595F6600
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Will the Standard Ignition TS-412 work on a 1990-1992 Infiniti M30?
Yes. Standard Ignition TS-412 is a direct-fit replacement for the 1990-1992 Infiniti M30 and the 1990-1992 Infiniti Q45, made to the same resistance and temperature ratings as the OE.
Does this Standard Ignition switch come with a wiring harness?
Yes. Standard Ignition TS-412 includes a 13.5 in (342.9 mm) wiring harness with a square female plug-in connector. Mounting hardware and mounting brackets are not included.
What thread size does the TS-412 cooling fan switch have?
This cooling fan switch has a 16MMX1.50 thread. It is a 12 volt unit with two male pin terminals.
How can I tell if a cooling fan switch is going bad?
Signs can include a fan that never starts or runs constantly, or an engine temperature that climbs. A shop can test the switch with the engine running.
How does this cooling fan switch tell the fan when to turn on?
A wax formulation expands when heated and activates a snap-action electrical contact, which sends the signal to the fan controller. Each unit is calibrated and tested at its specified temperature.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.