Standard Ignition Engine Oil Pressure Switch P/N:PS-120
Standard Motor Products
Standard Ignition PS-271 oil pressure switch for the 1989-1998 Porsche 911 and other vehicles reports engine oil pressure to the dashboard. This engine oil pressure switch sends a reading to the dash oil pressure gauge and turns on the low oil pressure warning light.
A warning light that flickers or stays lit, a gauge that reads zero or jumps around, or oil seeping at the switch body can mean the oil pressure switch is failing. A faulty gauge, a damaged wire or connector, or truly low oil pressure from a worn oil pump can be behind these signs too, so find the cause before buying. Have a lit oil light looked at promptly.
This oil pressure switch is listed for a wide range of Porsche models, including the 1992-1995 Porsche 968 and the 1983-1991 Porsche 944, as a direct replacement with OE fit. Each engine takes one switch.
Fit and size
Build and materials
One oil pressure switch. A gauge is not included.
Interchange: S4095 · PS466 · OP6154 · 88924422 · 92860620301 · 92860620302
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Will the Standard Ignition PS-271 fit my 1983-1991 Porsche 944?
Yes. The Standard Ignition PS-271 oil pressure switch fits the 1983-1991 Porsche 944 and the 1992-1995 Porsche 968; for another Porsche, find your car in the "Vehicles it fits" section.
Does this oil pressure switch run the gauge or only the warning light?
Both. This oil pressure switch sends a reading to the dash oil pressure gauge and turns on the low oil pressure warning light through its stud and blade terminals.
Does the PS-271 come with an oil pressure gauge?
No. The Standard Ignition PS-271 is one oil pressure switch only, and the dash gauge is not included.
What can a bad oil pressure switch do to the oil light and gauge?
A failing oil pressure switch can make the warning light flicker or stay on, the gauge read zero or jump, or oil seep at its body. A shop can test the actual oil pressure, so have a lit oil light checked promptly.
Is every PS-271 switch tested for leaks?
Yes. Each unit of this oil pressure switch is tested on vehicles and on automated equipment that activates the switch, checks it for leaks and stresses it to confirm it meets specification.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.