Standard Ignition Engine Oil Pressure Switch P/N:PS623
Standard Motor Products
The Standard Ignition PS663 switch for the 2011-2017 Audi A6 Quattro and other vehicles is an engine oil pressure switch that senses engine oil pressure and sends that signal to the dashboard warning system.
A failing oil pressure switch can show up as an oil warning light that flickers or stays on, oil seeping from the switch body, or erratic oil pressure readings. Before you replace the switch, rule out a low oil level, a damaged connector and a real oil pressure fault, and have any oil pressure warning looked at promptly.
This switch is listed for a wide range of Audi and Volkswagen models, including the 2012-2017 Audi A7 Quattro and the 2012-2017 Audi A8 Quattro, as an OE-style direct-fit replacement. The rest of the Audi and Volkswagen applications are in the "Vehicles it fits" section.
Interchange: S4658 · PS779 · OP7658 · 059919081D · 059919081G · 06E919081G
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Will the Standard Ignition PS663 fit a 2011-2017 Audi A6 Quattro?
Yes. The Standard Ignition PS663 is an OE-style direct-fit engine oil pressure switch for the 2011-2017 Audi A6 Quattro, and the "Vehicles it fits" section shows the other Audi and Volkswagen models it fits.
Is the Standard Ignition PS663 a 1 terminal coolant temperature switch?
No. The Standard Ignition PS663 is an engine oil pressure switch with 2 male blade terminals; it senses engine oil pressure, not coolant temperature.
What kind of diaphragm does this oil pressure switch use?
This oil pressure switch uses a high-temperature polyimide film diaphragm that resists rupture and oil leakage, and the switch is designed to handle rapid pressure pulsations without component damage.
Can a bad oil pressure switch make the oil warning light flicker?
Yes. A faulty oil pressure switch can make the oil warning light flicker or stay on, and it can also show up as erratic oil pressure readings or oil seeping from the switch body.
How is this oil pressure switch tested?
Each oil pressure switch is tested on vehicles and on automated equipment that activates the switch, checks it for leaks and stresses it to confirm it meets specification.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.