Standard Ignition GDL104 fuel feed line for the 2013-2016 Buick Verano 4-cylinder 2.0L and other vehicles carries fuel toward the engine. It is a direct-fit OE replacement for gasoline direct-injection (GDI) fuel systems, installed in the intermediate position.
A fuel smell, a wet or stained spot at a fitting, or hard starting can mean a fuel feed line needs replacing. A weak fuel pump, a clogged fuel filter or a faulty injector can also make an engine hard to start, so find the cause before buying. A fuel leak is not something to keep driving on; have a shop look at it promptly.
This fuel feed line also fits the 2011-2013 Buick Regal 4-cylinder 2.0L and the 2008-2010 Chevrolet Cobalt 4-cylinder 2.0L. If your car is something else, look up your year, make and model in the "Vehicles it fits" section.
Fit and size
Build and materials
One fuel feed line with its fittings; this listing holds one line, and the vehicle takes one. Hardware is not included, so plan on new hardware rather than reusing the old pieces.
Interchange: 2-34408 · 800-6509
LGD14 · 12590703 · 12620297 · 12636128
This part cross-references / interchanges with the following part numbers:
Does the Standard Ignition GDL104 fuel feed line fit the 2011-2013 Buick Regal 4-cylinder 2.0L?
Yes. Standard Ignition GDL104 fits the 2011-2013 Buick Regal 4-cylinder 2.0L, and the car takes one. Other years and models are in the "Vehicles it fits" section.
Does the GDL104 fuel feed line come with its fittings?
Yes. This fuel feed line comes with its fittings. Hardware is not included, so have new hardware ready.
What thread does the screw-on end of this fuel feed line use?
The screw-on end of the Standard Ignition GDL104 has a 14MMX1.50 thread, and the other end is a push-on fitting. The line is 6.5 in (165.1 mm) long.
How can I tell if a fuel feed line is leaking?
Look for a fuel smell, or a wet or stained spot at the fittings, with the engine off and cool. Cracks or kinks can show too; a shop can test the line, and a leak should be checked promptly.
Is this fuel feed line made for GDI engines?
Yes. The fuel injection type is GDI and the fuel type is gas. The line is molded and made of metal and plastic.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
