Standard Ignition GDL701 fuel feed line for the 2007-2012 Mini Cooper 4-cylinder 1.6L carries gasoline between its two screw-on ends in the direct-injection fuel system.
- Molded metal construction
- Screw-on fitting at each end, both with a 1/2-20 thread
- Made for gasoline direct injection (GDI) fuel systems
- Materials chosen to withstand harsh engine conditions
- Goes through extensive testing and validation for proper performance
Quick facts
- Part: Standard Ignition GDL701 fuel feed line
- Fits: 2007-2012 Mini Cooper 4-cylinder 1.6L
- Material: Metal
- Condition: New
A fuel smell near the engine, fuel staining at either end of the line, or hard starting can mean the feed line is worn or leaking, though the fuel pump or an injector can be behind the same signs, so find the cause before replacing the line. A shop can pressure-test the fuel system.
Fits
It is a direct-fit OE replacement for the 2007-2012 Mini Cooper 4-cylinder 1.6L.
Specifications
Fit and size
- Quantity per vehicle: 1
- Length: 2.75 in (69.85 mm)
- Inner diameter: 0.168 in (4.28 mm)
- Thread size, both ends: 1/2-20
- Port quantity: 2
Build and materials
- Material: Metal
- Construction: molded
- End fittings: screw on, both ends
- Fuel injection type: GDI
- Fuel type: gas
- Condition: New
- Country of origin: Spain
In the box
One fuel feed line with its fittings. This listing holds one line, and the 2007-2012 Mini Cooper 4-cylinder 1.6L takes one. Mounting hardware is not included, so plan on new hardware rather than reusing the old.
Product information is for general reference and may contain errors. See our Disclaimer.
Frequently Asked Questions
Is the Standard Ignition GDL701 fuel feed line right for a 2007-2012 Mini Cooper 4-cylinder 1.6L?
Yes. The Standard Ignition GDL701 is a direct-fit OE replacement for the 2007-2012 Mini Cooper 4-cylinder 1.6L, and that engine takes one.
Does this GDI fuel feed line come with its fittings?
Yes, the fittings are included with the line. Mounting hardware is not included, so plan on new hardware.
What thread size and length does the GDL701 fuel feed line have?
Both ends are screw-on with a 1/2-20 thread. The Standard Ignition GDL701 is 2.75 in (69.85 mm) long with a 0.168 in (4.28 mm) inner diameter.
How can I tell if a fuel feed line is leaking?
A fuel smell near the engine, or wetness and staining at the ends of this fuel feed line, can point to a leak. Look only with the engine off and cool, and have it checked promptly.
Is this fuel feed line meant for a gasoline direct-injection engine?
Yes. The Standard Ignition GDL701 is listed for GDI fuel systems running gas, and it has two ports.
