Standard Ignition Fuel Injection Pressure Regulator P/N:PR573
Standard Motor Products
Standard Ignition PR188 fuel injection pressure regulator for the 1988-1991 Dodge Dakota V6 3.9L, the 1989-1991 Dakota V8 5.2L and other vehicles regulates fuel pressure in the injection system.
When a regulator stops holding pressure steadily, you may notice hard starting, a rough idle or a fuel smell. If the regulator is the cause, this unit replaces it. Other fuel-system faults, such as a weak pump or a restricted filter, can look alike, so before buying, inspect the regulator for fuel seepage or damage with the engine off and cool; a shop can test fuel pressure.
The 1988-1991 Dodge B250 V6 3.9L or V8 5.2L, the 1990-1992 B250 V8 5.9L, the 1988-1991 Dodge D250 V6 3.9L or V8 5.2L, the 1989-1992 D250 V8 5.9L and more all fit this regulator. Each engine takes one. If your Dodge is not named here, look for it in the "Vehicles it fits" section.
Fit and size
Build and materials
One fuel injection pressure regulator and one caution sheet.
Interchange: 2-19563 · 3-19563 · 800-300
22809 · FPR40 · 4418152 · 4418608 · 83507113 · 83507114 · PR188T
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Does the Standard Ignition PR188 fit the 1988-1991 Dodge Dakota V6 3.9L?
Yes. Standard Ignition PR188 fits the 1988-1991 Dodge Dakota V6 3.9L and the 1989-1991 Dakota V8 5.2L, one regulator per engine. For other Dodge models, use the "Vehicles it fits" section.
What comes with the PR188 fuel injection pressure regulator?
One fuel injection pressure regulator and a caution sheet.
Is the Standard Ignition PR188 adjustable?
No. Standard Ignition PR188 is a non-adjustable, return-type fuel injection pressure regulator with an operating pressure of 14.5 psi.
How many ports does this fuel injection pressure regulator have?
This fuel injection pressure regulator has three ports and three inlets, with a straight nipple orientation and direct mounting.
How is the PR188 fuel injection pressure regulator tested?
Testing includes 200+ hours of vibration, 1000+ hours of extreme heat and cold operation, and on-vehicle testing.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.