Standard Ignition Fuel Injection Pressure Regulator P/N:PR353
Standard Motor Products
Standard Ignition PR328 fuel injection pressure regulator for the 1996-2000 Dodge Avenger V6 2.5L, the 1997-1999 Avenger 4-cylinder 2.0L and other vehicles controls the fuel pressure delivered to the injectors.
Hard starting, a rough idle or a fuel smell can be signs of a worn regulator. These signs alone do not prove the regulator is the problem, since a weak fuel pump is another common cause.
It is listed for a wide range of models from several makes, including the 1996-2000 Chrysler Sebring V6 2.5L, the 1997-1999 Sebring 4-cylinder 2.0L and the 1997-1999 Mitsubishi Eclipse 4-cylinder 2.0L. Open the "Vehicles it fits" section to check your exact model and engine.
Fit and size
Build and materials
One fuel injection pressure regulator with an O-ring and a caution sheet. This listing is one regulator, and each vehicle takes one. Mounting hardware is not included; the old fasteners may not be reusable, so plan on new ones.
Interchange: 2-19796 · 800-440
21837 · MR188222
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is the Standard Ignition PR328 right for the 1997-1999 Mitsubishi Eclipse 4-cylinder 2.0L?
Yes. Standard Ignition PR328 is listed for the 1997-1999 Mitsubishi Eclipse 4-cylinder 2.0L. The "Vehicles it fits" section shows the other models and engines.
Does the PR328 come with an O-ring?
Yes. Standard Ignition PR328 comes with an O-ring and a caution sheet. Mounting hardware is not included.
Is this fuel injection pressure regulator made of steel?
Yes. The regulator body is steel with a silver finish. It mounts with a screw-in connection and has one port with a straight nipple.
Could hard starting or a fuel smell mean the regulator needs replacing?
Yes, they can be signs of a failing regulator, along with a rough idle. A shop can test fuel pressure, and a fuel smell is worth having checked promptly.
How is the PR328 regulator tested?
Standard Ignition PR328 was validated with 200+ hours of vibration testing, 1000+ hours of extreme heat and cold operational testing and on-vehicle testing.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.