Standard Ignition Fuel Injection Throttle Body P/N:S20238
Standard Motor Products
Standard Ignition S20015 fuel injection throttle body for the 2010-2011 Chevrolet Equinox 4-cylinder 2.4L and other vehicles regulates the air flowing into the engine. It is a new part and includes the throttle position sensor.
A rough idle, hesitation when you press the pedal or a check engine light can mean a throttle body is worn or sticking. These signs alone do not prove the throttle body is at fault, since a vacuum leak can bring on similar symptoms.
The 2008-2012 Chevrolet Malibu 4-cylinder 2.4L, the 2010-2011 Buick LaCrosse 4-cylinder 2.4L and the 2010-2011 Chevrolet Equinox 4-cylinder 2.4L all take this throttle body, and so do other vehicles. One throttle body goes on each engine. If your car is not named here, open the "Vehicles it fits" section and look up your exact model and engine.
Fit and size
Build and materials
One throttle body with its gasket, seals and throttle position sensor. Mounting hardware, fuel injectors and a throttle body spacer are not included, and the old fasteners may not be reusable, so plan on new ones.
Product information is for general reference and may contain errors. See our Disclaimer.
Is the Standard Ignition S20015 throttle body right for a 2008-2012 Chevrolet Malibu 4-cylinder 2.4L?
Yes, the Standard Ignition S20015 throttle body fits the 2008-2012 Chevrolet Malibu 4-cylinder 2.4L. It also fits the 2010-2011 Buick LaCrosse 4-cylinder 2.4L.
Does the S20015 throttle body come with a gasket?
Yes, the Standard Ignition S20015 comes with a throttle body gasket, seals and the throttle position sensor. Mounting hardware, fuel injectors and a throttle body spacer are not included.
How many pins does the connector on this throttle body have?
This throttle body has one female connector with 6 male pin terminals.
Does the Standard Ignition S20015 need a relearn after it is installed?
Yes, a relearn is required after installation. Each component is assembled and calibrated to precise output voltages to make the relearning process smooth.
What do the sealed ball bearings in this throttle body do?
The sealed ball bearings limit airflow leakage and reduce mass air-flow reading errors.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.