Standard Ignition Fuel Injection Throttle Body P/N:S20228
Standard Motor Products
Standard Ignition S20197 fuel injection throttle body for the 2004-2009 Toyota Tundra V8 4.7L, the 2007-2021 Tundra V8 5.7L and other vehicles controls how much air enters the engine. It is designed and tested for import vehicles.
A failing throttle body can show up as a rough idle, hesitation on acceleration or a check engine light. Before you replace this part, rule out a vacuum leak, a dirty intake or a wiring fault, since those can produce symptoms like these. Each unit is calibrated to match OE output voltages, which supports a smooth relearn.
It is listed for a wide range of Toyota and Lexus models, including the 2004-2010 Toyota Sequoia V8 4.7L, the 2008-2022 Sequoia V8 5.7L and the 2004-2009 Toyota 4Runner V8 4.7L, and each takes one throttle body. Owners of other Toyota or Lexus models can find their year and engine in the "Vehicles it fits" section.
Fit and size
Build and materials
One throttle body with its throttle position sensor and one seal. Mounting hardware, fuel injectors, a throttle body spacer and an idle air control motor are not included, so plan on new mounting hardware, as the old pieces may not be reusable.
Interchange: TB1218D · 220300F010 · 220300S010 · 2203038020 · 2203050200 · ETB545
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is the Standard Ignition S20197 throttle body right for the 2007-2021 Toyota Tundra V8 5.7L?
Yes. Standard Ignition S20197 is listed for the 2007-2021 Toyota Tundra V8 5.7L and the 2004-2009 Tundra V8 4.7L, and each takes one. Other years and engines are in the "Vehicles it fits" section.
Is the throttle position sensor included with this fuel injection throttle body?
Yes, the throttle position sensor is part of the unit, and a seal comes with it. Mounting hardware, fuel injectors, a throttle body spacer and an idle air control motor are not included.
How many terminals does the Standard Ignition S20197 throttle body connector have?
Standard Ignition S20197 has one female connector with six male blade terminals.
Can a worn throttle body cause hesitation or a rough idle?
Yes. A worn throttle body can show up as a rough idle, hesitation on acceleration or a check engine light. A shop can test the unit to confirm.
Does this throttle body need a relearn after installation?
Yes, a relearn is required after installation. Each component is calibrated to match OE output voltages to support a smooth relearning process.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.