Standard Ignition Fuel Injector P/N:TJ55
Standard Motor Products
Standard Ignition FJ1243 fuel injector for the 2010 IC Corporation CE Commercial 6-cylinder 7.6L and other vehicles sprays diesel fuel directly into the cylinder. This remanufactured Standard Ignition fuel injector is calibrated to OE specification and rebuilt in North America.
Hard starting, a rough idle or fuel showing at the injector can mean an injector is worn, though a clogged fuel filter or a weak fuel pump can be behind the same trouble, so find the cause before you replace anything.
The vehicles it fits include the 2010 IC Corporation CE Commercial 6-cylinder 7.6L, the 2007-2010 IC Corporation 1300 FBC 6-cylinder 7.6L and the 2007-2010 IC Corporation CE Integrated 6-cylinder 7.6L. Those three take six injectors, and the count differs on some other models. Open the "Vehicles it fits" section to check your exact model and engine.
Fit and size
Build and materials
One fuel injector with new o-rings, new copper seals and an instruction sheet. Hardware is not included, and old fasteners may not be reusable.
Interchange: 800-2279R
67850 · INJ435R · 1848718C91 · 1848718C93 · 5010561R91 · 5010561R93
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is the Standard Ignition FJ1243 right for the 2007-2010 IC Corporation 1300 FBC 6-cylinder 7.6L?
Yes. Standard Ignition FJ1243 fits the 2007-2010 IC Corporation 1300 FBC 6-cylinder 7.6L, which takes six. Open the "Vehicles it fits" section to look up other models and engines.
Do these remanufactured injectors come with o-rings and copper seals?
Yes. The Standard Ignition FJ1243 includes new o-rings, new copper seals and an instruction sheet. Mounting hardware is not included.
How many terminals does this diesel injector have?
It has four male pin terminals. It is a direct-injection diesel unit.
Can black smoke or lost power mean a diesel injector is worn?
Black exhaust smoke, a loss of power or a noticeable misfire can mean an injector is worn. A shop can test injector flow when the cause is unclear.
How is this remanufactured injector tested?
Each injector is calibrated and checked on a flow bench to validate fuel flow. It is rebuilt with new nozzles, springs, delivery valves, solenoids and other core components.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.