Standard Ignition Fuel Injector P/N:FJ314
Standard Motor Products
Standard Ignition FJ31 fuel injector for the 1990-1991 Geo Storm 4-cylinder 1.6L, the 1992-1993 Storm 4-cylinder 1.8L and other vehicles meters fuel and sprays it into the engine for combustion.
A rough idle, hesitation or poor fuel economy can come from a clogged or leaking injector, or from something else in the fuel or ignition system, so find the cause first. With the engine off and cool, a look at the connector, wiring and injector body for damage or fuel residue is a good start.
This fuel injector is listed for a wide range of Geo, Isuzu, Buick, Oldsmobile and Pontiac models and is specifically designed for GM engines. Among them are the 1990-1991 Isuzu Impulse 4-cylinder 1.6L and the 1992 Impulse 4-cylinder 1.8L, and the 1991 Isuzu Stylus 4-cylinder 1.6L and the 1992 Stylus 4-cylinder 1.8L. This listing is one injector; the four-cylinder engines it fits take four.
Fit and size
Build and materials
One fuel injector with an O-ring.
Interchange: 2-18025 · 800-1020N
57025 · 17059401 · 17086532 · 17086896 · 17087515 · 17102724 · 17102729 · 17105384 · 17111965 · 5235236 · 8170594010 · 8171053840
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is this Standard Ignition FJ31 fuel injector right for the 1990-1991 Geo Storm 4-cylinder 1.6L?
Yes. The Standard Ignition FJ31 fits the 1990-1991 Geo Storm 4-cylinder 1.6L and the 1992-1993 Storm 4-cylinder 1.8L, plus many other vehicles. Look up your own car in the "Vehicles it fits" section.
Does the FJ31 fuel injector come with its O-ring?
Yes. The Standard Ignition FJ31 comes with an O-ring, and each listing is a single injector.
What kind of terminals does this top-feed fuel injector have?
This fuel injector has two male blade terminals. They are made of corrosion-resistant brass.
What are signs a top-feed MFI fuel injector is failing?
A rough idle, hesitation or a fuel smell can mean a clogged or leaking injector, or a problem elsewhere in the fuel system. A shop can test spray pattern and flow.
Is the Standard Ignition FJ31 made in the USA?
Yes. The Standard Ignition FJ31 is designed and manufactured in Greenville, SC, and is validated and tested in the USA.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.