Standard Ignition Fuel Injector P/N:FJ1111
Standard Motor Products
Standard Ignition FJ887 fuel injector for the 2007-2009 Chevrolet Silverado 1500 V8 4.8L or 5.3L, the 2008-2009 Silverado 1500 V8 6.0L and other vehicles sprays metered fuel into the engine. It is specifically designed for GM engines.
A rough idle, a misfire or hesitation can come from an injector that is clogged or leaking, among other causes. Before you replace an injector, rule out the ignition coils, spark plugs and any vacuum leak, and have a shop test fuel pressure.
It is listed for a wide range of Chevrolet, GMC and Cadillac models, and it is also a fuel injector for the 2007-2008 GMC Sierra 1500 V8 6.2L, the 2007-2009 Sierra 1500 V8 4.8L or 5.3L and the 2008-2009 Sierra 1500 V8 6.0L. This listing is one injector; the 2008-2009 Chevrolet Silverado 2500 V8 4.8L takes eight.
Fit and size
Build and materials
One fuel injector with its O-rings. Hardware is not included, and the old hardware may not be reusable.
Interchange: 2-38948 · 800-1923N
67487 · 12580681 · 19421333 · 8125806810 · 8194213330
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is the Standard Ignition FJ887 a Chevy Silverado 1500 fuel injector for the 2007-2009 V8 4.8L or 5.3L?
Yes. Standard Ignition FJ887 is listed for the 2007-2009 Chevrolet Silverado 1500 V8 4.8L or 5.3L and the 2008-2009 Silverado 1500 V8 6.0L. If your truck is another model, look it up in the "Vehicles it fits" section.
Do the O-rings come with this fuel injector?
Yes. The Standard Ignition FJ887 includes its O-rings. Hardware is not included, so plan on getting it separately.
What kind of electrical connector does this injector have?
It has two male blade terminals, made of corrosion-resistant brass. The injector is a top-feed MFI type.
Which symptoms can come from a clogged or leaking injector?
A rough idle, a misfire or hesitation can come from a failing injector, though other parts can cause them too. A shop can test fuel pressure and injector output.
Is the Standard Ignition FJ887 tested and calibrated before use?
Yes. The Standard Ignition FJ887 is end-of-line tested and calibrated, and it was validated through lab, climate and real-world vehicle testing. It is designed and made in Greenville, SC.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.