Standard Ignition Fuel Injector Seal Kit P/N:SK112
$7.99
(You save)
Seal your fuel injectors tight and address weeping, hardened O-rings with the Standard Ignition Fuel Injector Seal Kit SK112. This kit drops in as a direct-fit replacement for the 1998 Subaru Forester, the 1993-1998 Subaru Impreza, the 1992-1998 Subaru Legacy, and the 1992-1996 Subaru SVX, supplying the seals that ride between each fuel injector and its mating surfaces.
Injector sealing: renews the rubber seals that seal each fuel injector where it meets the fuel rail and intake, helping keep pressurized fuel contained.
Service-ready set: packaged to reseal the injectors during a service or reinstallation job, so you replace hardened, cracked, or leaking originals in one kit.
Leak-focused fix: if worn injector seals are the source of a fuel odor, seepage around the injectors, or an air leak at the injector base, these replace them.
Signs the original seals may need replacing include fuel smell near the intake, visible weeping at an injector, or a rough idle traced to an air leak at the injector seat. Diagnose the underlying cause before replacing.
Interchange: 274837 · 2-12368 · 212368 · 800-9300 · 8009300 · 16698AA050. Manufacturer part number SK112.
This part cross-references / interchanges with the following part numbers:
274837, 2-12368, 800-9300, SK112, 16698AA050
Frequently Asked Questions
What vehicles does the SK112 seal kit fit?
It's a direct-fit replacement for the 1998 Subaru Forester, 1993-1998 Subaru Impreza, 1992-1998 Subaru Legacy, and 1992-1996 Subaru SVX. Check the Buyer's Guide tab to confirm your vehicle.
What does a fuel injector seal kit do?
It renews the seals that ride between each fuel injector and its mating surfaces, helping keep pressurized fuel contained and preventing air leaks at the injector base.
How do I know my injector seals need replacing?
Common signs include a fuel smell near the intake, weeping or seepage around an injector, or a rough idle traced to an air leak at the injector seat. Diagnose the cause before replacing.
What interchange numbers does SK112 replace?
It cross-references 274837, 2-12368 (212368), 800-9300 (8009300), and 16698AA050. Match your original number to confirm the correct replacement.
Will this kit fix a rough idle?
If hardened or leaking injector seals are causing an air leak at the injector base, replacing them can address it. A rough idle has other possible causes, so diagnose first.
Write a Review
STANDARD MOTOR PRODUCTS
Standard Ignition Fuel Injector Seal Kit P/N:SK112
Fuel Injector Seal Kit - TBIOur fuel injector o-ring kits are quality-tested to ensure maximized longevity during extreme vehicle operationOur fuel injector o-rings are constructed with a high-temp...
WARNING:
These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to
www.P65Warnings.ca.gov.
