Give your fuel pressure sensor a fresh electrical connection to the wiring harness with the Standard Ignition Fuel Pressure Sensor Connector, part number S2855. It is a direct-fit replacement for the listed applications and fits many models from Ford, Lexus and Lincoln, among them the 2011-2017 Ford F-150 (V6-3.5L for 2011-2016, V6-2.7L for 2015-2017), 2012-2018 Ford Focus (L4-2.0L) and 2015-2018 Ford Edge (V6-2.7L). See the Buyer's Guide tab for the full list.
The fuel pressure sensor reports fuel pressure to the engine control system, and this connector is the electrical link between that sensor and the vehicle wiring. If the original connector has cracked, melted or corroded, the sensor signal can be interrupted. This connector replaces the damaged original.
Before you replace the connector, inspect the sensor circuit and diagnose the cause of any fuel pressure sensor fault. Some sensor problems come from the sensor itself or from the wiring rather than the connector. Follow the vehicle service information for disconnecting the battery and making the connection.
What does the Standard Ignition S2855 connector do?
It is the electrical connector for the fuel pressure sensor. It links the sensor to the vehicle wiring harness so the sensor's signal can reach the engine control system.
Is this the right connector for a 2015-2018 Ford Edge sensor with the 2.7L engine?
It is listed for the 2015-2018 Ford Edge with the V6-2.7L engine. See the Buyer's Guide tab for the full application list.
Is it made for the 2012-2018 Ford Focus 2.0L sensor and the 2011-2017 Ford F-150 2.7L / 3.5L?
Yes. It is listed for the 2012-2018 Ford Focus with the L4-2.0L engine. On the 2011-2017 Ford F-150 it is listed for 2011-2016 models with the V6-3.5L and 2015-2017 models with the V6-2.7L.
What are signs the fuel pressure sensor connector may need replacing?
Signs include a cracked or melted housing, a broken locking tab, and corroded or loose terminals. Intermittent sensor readings can have other causes, so diagnose the circuit before replacing parts.
How many connectors does my vehicle use?
The listed applications use one fuel pressure sensor connector each. For the installation steps, follow the vehicle's service information.
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
