Standard Ignition Idle Air Control Valve P/N:AC495
Standard Motor Products
Standard Ignition AC234 idle air control valve for the 1999-2002 Chevrolet Silverado 1500 V8 4.8L or 5.3L and other vehicles controls the air that bypasses the throttle plate at idle. A stepping motor moves the pintle to set that airflow.
A rough or surging idle, stalling as you slow to a stop, or an idle speed that sits too high or too low can mean the valve is wearing out. A vacuum leak, a dirty throttle body or a faulty throttle position sensor can be behind those signs too, so find the cause before you buy a valve.
This valve fits the 1999-2002 GMC Sierra 1500 V8 4.8L or 5.3L and the 2001-2002 Sierra 1500 V8 6.0L, plus the 1999-2000 Chevrolet Silverado 2500 V8 5.3L and the 1999-2002 Silverado 2500 V8 6.0L. Many other Chevrolet, GMC, Cadillac and Pontiac models take the same valve; if yours isn't named here, look up its year and engine in the "Vehicles it fits" section.
Fit and size
Build and materials
One idle air control valve. This listing holds one valve, and each vehicle takes one.
Interchange: 2-29653
89053319 · 31036 · IAC60 · AC162 · 17113598
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Does the Standard Ignition AC234 fit the 1999-2002 GMC Sierra 1500 with the 4.8L or 5.3L V8?
Yes. Standard Ignition AC234 fits the 1999-2002 GMC Sierra 1500 V8 4.8L or 5.3L and the 2001-2002 Sierra 1500 V8 6.0L. If your truck isn't one of these, look it up in the "Vehicles it fits" section.
What connector does the AC234 idle air control valve have?
Standard Ignition AC234 has an oval connector with 4 terminals and comes as a complete assembly. This listing is one valve.
What kind of magnet does this idle air control valve use?
It uses a polymer-blended, isotropic neodymium/iron/boron magnet, which gives accurate control of the pintle and airflow.
What idle problems can come from a worn idle air control valve?
A rough or surging idle, stalling when you slow down, or an idle speed that is too high or low can be linked to the valve. A shop can test it.
How is this idle air control valve tested?
The actuator is load tested to confirm it delivers a force greater than the actual load. The stepping motor also has a shielded ball bearing that resists environmental contaminants.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.