Standard Ignition KS225 right ignition knock (detonation) sensor for the 2002-2026 Toyota Corolla 4-cylinder 1.8L, the 2009-2010 Corolla 4-cylinder 2.4L, the 2019-2026 Corolla 4-cylinder 2.0L and other vehicles detects engine knock vibration and sends a voltage signal to the engine computer. The computer reads that signal so it can respond to knock.
- Each unit is 100% tested with an accelerometer-based vibration test
- Automated data acquisition system monitors sensor voltage output across the specified frequency range during manufacturing
- Responds to knock frequencies up to 1000 Hz and accommodates shifts in engine knock frequency
- Quality control is maintained from the components through the finished product
Quick facts
- Part: Standard Ignition KS225 ignition knock (detonation) sensor
- Fits: the 2002-2026 Toyota Corolla 4-cylinder 1.8L, the 2009-2010 Corolla 4-cylinder 2.4L, the 2019-2026 Corolla 4-cylinder 2.0L and other vehicles
- Position: Right
- Material: ABS Plastic
- Condition: New
A failing sensor can set a check engine light or leave the engine pinging under load. These signs alone do not prove this sensor is the problem; a chafed wire at its connector is another common source of a knock code.
Fits
This right-side sensor also fits the 2004-2025 Toyota RAV4 and the 2003-2011 Toyota Camry 4-cylinder 2.4L, the 2004-2006 Camry V6 3.3L, the 2007-2024 Camry V6 3.5L and the 2010-2024 Camry 4-cylinder 2.5L. This listing is one sensor and the other side is ordered separately. The quantity for this side varies by engine, and the 2007-2024 Toyota Camry V6 3.5L takes two. Driving something else from Toyota or Lexus? Look up your own car in the “Vehicles it fits” section.
Specifications
Fit and size
- Position: Right
- Mounting type: Bolt mount
- Attachment method: Direct
- Connector: 1 oval, female
- Terminals: 2, male blade
Build and materials
- Material: ABS Plastic
- Knock frequency response: up to 1000 Hz
- Condition: New
- Country of origin: Taiwan
In the box
One ignition knock (detonation) sensor. Mounting hardware is not included, so plan on new hardware, because the old pieces may not be reusable.
Interchange: S8825 · SU6247 · DKS665 · 88971397 · DKS665SB · KS73 · KS225T · 8961502020 · 8961506010 · 8961520090 · 89615BZ030 · 89615BZ040
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
S8825, SU6247, DKS665, 88971397, DKS665SB, KS73, KS225, KS225T, 8961502020, 8961506010, 8961520090, 89615BZ030, 89615BZ040
Frequently Asked Questions
Is the Standard Ignition KS225 ignition knock (detonation) sensor right for the 2004-2025 Toyota RAV4?
Yes, Standard Ignition KS225 fits the 2004-2025 Toyota RAV4. Use the “Vehicles it fits” section to match your own engine and model year.
Does the Standard Ignition KS225 come with a mounting bolt?
No. This Standard Ignition KS225 listing is one right-side ignition knock (detonation) sensor, and mounting hardware is not included, so plan on new hardware.
How high a knock frequency can this sensor respond to?
This sensor responds to knock frequencies up to 1000 Hz, so it can follow shifts in engine knock frequency across a broad range of conditions.
What kind of connector does this ignition knock (detonation) sensor have?
This sensor has one oval female connector with two male blade terminals, and it attaches directly with a bolt mount.
Does the Standard Ignition KS225 replace number 8961506010?
Yes, 8961506010 is among the numbers this Standard Ignition KS225 replaces, along with S8825 and KS73.
