Standard Ignition Ignition Knock (Detonation) Sensor P/N:KS482
Standard Motor Products
Standard Ignition KS81 ignition knock (detonation) sensor for the 1995-2004 Toyota Tacoma V6 3.4L and other vehicles detects engine knock and signals the computer. The computer uses that signal to know when detonation is happening.
A failing ignition knock (detonation) sensor can show up as a check engine light, engine pinging or weaker performance. If this sensor is the cause, this one replaces it. Before ordering, look over the plug, wiring and sensor body for cracks or corrosion with the engine off and cool, because a damaged plug or wire can also set off those warnings.
This sensor also fits the 2000-2004 Toyota Tundra V6 3.4L, the 2002-2003 Tundra V8 4.7L and the 1994-2001 Toyota Camry V6 3.0L. The listing is one sensor. The 1995-2004 Toyota Tacoma V6 3.4L takes one, while the 1994-2001 Toyota Camry V6 3.0L takes two.
Fit and size
Build and materials
One ignition knock (detonation) sensor. Mounting hardware is not included, so plan on new hardware rather than reusing the old.
Interchange: 17-0747
S8648 · KS19 · SU4040 · DKS543 · DKS543SB · KS81T · 8961512040
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Does the Standard Ignition KS81 fit the 1995-2004 Toyota Tacoma V6 3.4L?
Yes, Standard Ignition KS81 is listed for the 1995-2004 Toyota Tacoma V6 3.4L, which takes one. If your car is a different one, look up its year, model and engine in the "Vehicles it fits" section.
Does this ignition knock (detonation) sensor come with mounting hardware?
No. Mounting hardware is not included; this listing is one screw-in sensor with a plug-in connector. Plan on new hardware instead of reusing the old.
What knock frequency range does the Standard Ignition KS81 cover?
Standard Ignition KS81 is designed to respond to knock frequencies up to 1000 Hz. That lets it follow shifts in engine knock frequency across a broad range of vehicle conditions.
Can a bad ignition knock (detonation) sensor cause engine pinging?
It can, and a check engine light or weaker performance may come with it. A damaged connector or wire can also trigger those warnings, and a shop can test the sensor's signal output with the engine running.
Is each ignition knock (detonation) sensor tested before sale?
Yes. Every unit gets a 100% accelerometer-based vibration test. During manufacturing, an automated data acquisition system monitors the output voltage at the specified frequency range.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.