Standard Ignition Ignition Lock Cylinder and Switch,Ignition Switch P/N:US-140
$50.99
(You save)
Replace a worn key cylinder and tired ignition contacts in one step with the Standard Ignition switch US-140, an ignition switch with lock cylinder for classic Nissan trucks. It is a direct-fit replacement for the 1972-1974 Nissan 620 Pickup, the 1975-1979 Nissan 620 and the 1980-1982 Nissan 720. See the Buyer's Guide tab for engine details.
The lock cylinder takes the key and turns the switch. The switch then sends battery power to the ignition, accessory and starter circuits. Signs this part may need replacing include a key that sticks or is hard to turn, no crank at the start position, or power that drops out while driving. These symptoms can have other causes, so diagnose the problem first. If a worn switch or cylinder is the cause, US-140 replaces both.
Copper alloy conductors: Provide superior electrical conductivity with low resistive losses.
100% tested: Every unit is checked to verify both mechanical and electrical switching performance.
Controlled from start to finish: Standard is a global maker of original equipment ignition products and keeps full quality control over manufacturing, from the components to the finished product.
Built for the shop: A robust design and high-grade materials are made to meet the demanding needs of today's service professionals. The switch is built from quality materials for proper fit and function.
What vehicles does the Standard Ignition US-140 fit?
It is listed for the 1972-1974 Nissan 620 Pickup, the 1975-1979 Nissan 620 and the 1980-1982 Nissan 720. See the Buyer's Guide tab for engine details.
Does US-140 include the lock cylinder?
Yes. US-140 is an ignition switch with lock cylinder, so the key cylinder and the electrical switch come as one replacement unit.
What are signs an ignition switch may need replacing?
Signs include a key that sticks or is hard to turn, no crank at the start position, or power dropping out while driving. These symptoms can have other causes, so diagnose first.
Is the switch tested before it ships?
Yes. Standard Ignition tests 100% of its switches to verify both mechanical and electrical switching performance.
What are the switch conductors made of?
The switch uses copper alloy conductors. They provide superior electrical conductivity with low resistive losses.
Write a Review
Standard Motor Products
Standard Ignition Ignition Lock Cylinder and Switch,Ignition Switch P/N:US-140
Keep key-controlled starting and accessory power working the way it should with the Standard Ignition Ignition Switch / Ignition Starter Switch US-748. This ignition lock cylinder and switch assembly...
Replacing a worn 1996-2002 Nissan Quest switch? The Standard Ignition Lock Cylinder and Switch, part number US-668, combines the key lock cylinder and the ignition switch in one unit. It is cataloged...
Put dependable switching back behind your ignition key with the Standard Ignition Starter Switch US-362. This electrical switch sends power to the ignition, accessory and starter circuits as the key...
Replace a worn key cylinder and a faulty ignition switch in one assembly with the Standard Ignition switch US-509, an ignition switch with lock cylinder. It is a direct-fit replacement for the...
WARNING:
These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to
www.P65Warnings.ca.gov.
