Standard Ignition Ignition Lock Cylinder P/N:US-132L
Standard Motor Products
Standard Ignition US-255L ignition lock cylinder for the 1997-2001 Dodge Ram 1500 V6 3.9L or V8 5.2L, the 1997-2002 Ram 1500 V8 5.9L, the 2002 Ram 1500 V6 3.7L or V8 4.7L and other vehicles accepts your key to turn the ignition switch from the steering column.
A key that sticks, feels rough in the cylinder or will not turn the ignition can mean the cylinder is worn. Before you replace it, rule out a worn or bent key and a fault in the ignition switch, since either can give you similar trouble.
Built as a direct-fit OE replacement for Chrysler vehicles, this ignition lock cylinder also fits the 1997-2002 Dodge Ram 2500 6-cylinder 5.9L, V8 5.9L or V10 8.0L and the 1997-1999 Dodge Dakota V8 5.2L, the 1997-2000 Dakota 4-cylinder 2.5L or V6 3.9L, the 1998-2000 Dakota V8 5.9L and the 2000 Dakota V8 4.7L, and each vehicle takes one. Look up other Dodge, Chrysler, Jeep and Plymouth models in the "Vehicles it fits" section.
Fit and size
Build and materials
One ignition lock cylinder with two keys and instructions. The mounting bracket is not included, and an old one may not be reusable, so plan on a new bracket.
Interchange: 2-ILC187
CS711L · 4882804 · 4897986AA · 5003845AA · 5003893AA · KS6237 · LC63110 · KS6237SB · ILC187 · US255LT
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Does this Dodge Ram 1500 ignition lock cylinder fit a 2002 truck with the V6 3.7L or V8 4.7L?
Yes. Standard Ignition US-255L fits the 2002 Dodge Ram 1500 V6 3.7L and V8 4.7L, and each truck takes one. For other years or engines, look yours up in the "Vehicles it fits" section.
Does the Standard Ignition US-255L come with keys?
Yes. Standard Ignition US-255L comes with two keys and instructions, and the cylinder is coded. The mounting bracket is not included.
What are the tumblers and keys made of on this ignition lock cylinder?
The tumblers are solid brass, the keys are chrome plated brass, and the lock cores are die-cast zinc.
Could a sticking key mean this coded lock cylinder needs replacing?
Possibly. A key that sticks, is hard to insert or will not turn can mean a worn cylinder. A shop can test the ignition if you are unsure.
What testing does this ignition lock cylinder go through?
This lock cylinder undergoes mechanical and electrical performance testing for dependable operation.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.