Standard Ignition Ignition Lock Cylinder P/N:US-132L
Standard Motor Products
Standard Ignition US-452L ignition lock cylinder for the 2009-2019 Nissan Frontier 4-cylinder 2.5L or V6 4.0L and other vehicles takes your key and turns to start the engine. This Standard Ignition lock cylinder is a column-mounted replacement for a worn or damaged cylinder.
A key that sticks, turns stiffly or will not come out can mean the cylinder is worn. Before replacing it, look over your key for wear or a bent blade and compare it with a spare, since a damaged key can act the same way. A shop can test anything beyond that.
This ignition lock cylinder is a direct-fit OE replacement for the 2009-2019 Nissan Frontier 4-cylinder 2.5L or V6 4.0L, the 2005-2012 Nissan Pathfinder V6 4.0L and the 2008-2012 Pathfinder V8 5.6L, and the 2005-2015 Nissan Armada V8 5.6L. A 2005-2015 Nissan Armada V8 5.6L takes one. If your car is not named here, open the "Vehicles it fits" section and check your exact model and engine.
Fit and size
Build and materials
One ignition lock cylinder with two keys and instructions. The mounting bracket is not included; the old one may not be reusable, so plan on a new one.
Interchange: CS924L · KS6924L · LC64980 · D87005Z000 · D87005Z00J · D87005Z025 · D87005Z027
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Does the Standard Ignition US-452L fit a 2009-2019 Nissan Frontier 4-cylinder 2.5L or V6 4.0L?
Yes. Standard Ignition US-452L fits the 2009-2019 Nissan Frontier 4-cylinder 2.5L or V6 4.0L. For another car, open the "Vehicles it fits" section to check your model and engine.
Does the Standard Ignition US-452L come with keys?
Yes. Standard Ignition US-452L comes with 2 keys and instructions. The mounting bracket is not included.
What are the keys and tumblers made of in this ignition lock cylinder?
The tumblers are solid brass, the keys are chrome plated brass, and the lock cores are die-cast zinc.
My key sticks in the ignition. Could the lock cylinder be worn?
Yes, it can be. A key that sticks, feels stiff to turn or will not release can mean a worn cylinder, and a shop can test it.
Is the Standard Ignition US-452L a replacement for part number D87005Z000?
Yes. Standard Ignition US-452L replaces D87005Z000, along with D87005Z00J, D87005Z025 and D87005Z027.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.