Standard Ignition Ignition Switch P/N:US-136
Standard Motor Products
Send power to your starting and run circuits at the turn of a key with the Standard Ignition Ignition Starter Switch, part number US-216. It fits many vehicles, among them the 1992-2003 Ford F-150, 1992-2001 Ford F-250 and 1994-2004 Ford Mustang. It installs as a direct-fit replacement for the listed applications. See the "Vehicles it fits" section for the full list.
The ignition key operates this electrical switch. As the key moves through its positions, the switch routes battery power to the accessory, ignition and starter circuits. If a worn switch is causing a no-crank condition, stalling or accessories that cut out, this unit replaces it.
A weak battery, a faulty starter or a wiring problem can cause similar symptoms, so diagnose the fault before you replace the switch.
Interchange: 2-IS112
2IS112 · CS287 · IS112 · LS615 · KS6667 · 4C4Z11572AA · F0DZ11572A · F2DC11572AA · F2DZ11572A · F4DC11572AA · F4DZ11572A · F4DZ11572B · SW2483 · SW5011 · 19021093 · ZZM066123 · KS6667SB · 487500B000
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
What does the Standard Ignition US-216 ignition starter switch do?
The ignition key operates this electrical switch. As the key turns, it sends power to the accessory, ignition and starter circuits.
Is this the right Mustang switch for a 1994-2004 Ford Mustang?
Yes. US-216 is listed as a direct-fit ignition starter switch for the 1994-2004 Ford Mustang. The "Vehicles it fits" section shows the details for each listed vehicle.
Does it fit the 1992-2003 Ford F-150 and 1992-2001 Ford F-250?
Yes. It is listed for the 1992-2003 Ford F-150 and the 1992-2001 Ford F-250. The "Vehicles it fits" section shows every listed application.
What are signs an ignition switch may need replacing?
Possible signs are no crank when the key is turned, the engine shutting off while driving, and accessories or dash lights cutting out. A battery, starter or wiring fault can cause the same symptoms, so diagnose first.
How is this switch tested?
Standard Ignition tests 100% of its ignition switches to verify both mechanical and electrical switching performance. The switch uses copper alloy conductors for low resistive losses.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.