Standard Ignition Ignition Switch P/N:US-451
Standard Motor Products
Designed to route power cleanly from the key to your ignition and starter circuits, the Standard Ignition Starter Switch, part number US-278, is the electrical switch that powers those circuits as the key is turned. It fits many vehicles, among them the 1995-1998 Dodge Avenger, 2008-2015 Mitsubishi L200 and 1997-1999 Chrysler Sebring, and installs as a direct-fit replacement for the listed applications. See the "Vehicles it fits" section for the full list.
Standard Ignition is a global manufacturer of original equipment ignition products. It maintains complete quality control through the whole manufacturing process, from individual components to the finished switch.
This part may need replacing if the engine won't crank when the key is turned, if the engine stalls or cuts out while driving, or if dash lights and accessories flicker as the key moves. If a worn ignition switch is the cause, the US-278 replaces it. Diagnose the circuit before replacing the switch, because other parts can cause the same symptoms.
Interchange: 18-0448
180448 · CS591 · MB903639 · LS714 · KS6199
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
What does the Standard Ignition US-278 ignition switch do?
It is the ignition starter switch. As the key turns, it switches power to the ignition and starter circuits, and its copper alloy conductors carry that current with low resistive losses.
Is this the right Avenger ignition switch for a 1995-1998 Dodge Avenger?
Yes. It is listed as a direct-fit replacement for the 1995-1998 Dodge Avenger. The "Vehicles it fits" section shows the full fitment chart.
What other vehicles does this switch fit?
It fits many vehicles, including the 2008-2015 Mitsubishi L200 and the 1997-1999 Chrysler Sebring. Check the "Vehicles it fits" section for the complete list.
What are signs an ignition switch may be failing?
Signs include a no-crank condition, stalling while driving, or dash lights and accessories cutting out as the key moves. Diagnose first, because other parts can cause these symptoms.
Is each switch tested?
Yes. Standard Ignition tests 100% of its switches to verify both mechanical and electrical switching performance.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.