Standard Ignition Ignition Switch P/N:US-136
Standard Motor Products
Standard Ignition US-378 ignition starter switch for the 1991-1997 Toyota Land Cruiser sends power to the ignition and starter circuits when the key turns.
A worn switch can show up as hard starting, a key that turns without the engine cranking, or circuits that cut out intermittently. Before you replace it, rule out the battery, the starter and the wiring connections, because a weak battery or a faulty starter can produce similar symptoms.
It fits the 1991-1997 Toyota Land Cruiser, which takes one.
Fit and size
Build and materials
Interchange: CS680 · KS6301 · 8445060230
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is the Standard Ignition US-378 the right ignition switch for a 1991-1997 Toyota Land Cruiser?
Yes. Standard Ignition US-378 fits the 1991-1997 Toyota Land Cruiser, which takes one switch.
How many terminals does the US-378 ignition starter switch have?
The Standard Ignition US-378 has one rectangular female connector with 9 male blade terminals.
Does this ignition starter switch have copper conductors?
Yes. It has copper alloy conductors, which give low resistive losses.
Could hard starting mean the ignition starter switch is wearing out?
It can. Intermittent cranking or a key that turns with no response can mean a worn switch, and a shop can test the circuit to confirm.
How does the US-378 attach at the column?
The Standard Ignition US-378 mounts on the column with a bolt-on attachment and plugs in through its single connector.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.