Standard Ignition Manifold Absolute Pressure Sensor P/N:AS201
Standard Motor Products
Standard Ignition AS348 manifold absolute pressure sensor for the 2004-2010 Volvo S40 5-cylinder 2.4L and other vehicles sends manifold pressure data to the powertrain's electronic control unit. Also called a MAP sensor, it reads pressure in the intake manifold so the control unit can work with current engine load.
A failing MAP sensor can bring on a check engine light, a rough idle or hesitation when you accelerate. Those signs alone do not prove the sensor is at fault, since a vacuum leak at the intake is one other common source.
The vehicles it fits include the 2004-2010 Volvo S40 5-cylinder 2.4L, the 2005-2010 Volvo V50 5-cylinder 2.4L and the 2007-2009 Volvo S60 5-cylinder 2.4L. It is engineered for high mileage Volvo vehicles and lab tested to match OE specifications. If your Volvo is not named here, look up its year and engine in the "Vehicles it fits" section.
Fit and size
Build and materials
One manifold absolute pressure sensor with O-rings. This listing holds one sensor, and a car needs just one. The wiring harness, mounting bracket and hardware are not included, so plan on new mounting hardware rather than reusing the old.
Product information is for general reference and may contain errors. See our Disclaimer.
Does the Standard Ignition AS348 fit a 2004-2010 Volvo S40 with the 2.4L engine?
Yes. Standard Ignition AS348 fits the 2004-2010 Volvo S40 5-cylinder 2.4L, and the car takes one sensor.
Does the AS348 manifold absolute pressure sensor come with O-rings and a wiring harness?
The Standard Ignition AS348 includes O-rings. The wiring harness, mounting bracket and hardware are not included.
What connector does this manifold absolute pressure sensor have?
It has one rectangular, plug-in female connector with three male blade terminals, plus one vacuum port.
What might I notice when a manifold absolute pressure sensor starts to fail?
You can see a check engine light, a rough idle or hesitation under acceleration. A shop can test the sensor with a scan tool.
Is the Standard Ignition AS348 lab tested?
Yes. This sensor is lab tested to match OE specifications so it integrates properly with the vehicle's emissions system.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.