Standard Ignition Mass Air Flow Sensor P/N:MAS0470
Standard Motor Products
Standard Ignition MAS0315 mass air flow sensor for the 2008-2012 Honda Accord 4-cylinder 2.4L and other vehicles measures the air entering the engine and passes that reading to the ECU. The ECU uses it to balance the air/fuel ratio.
A failing mass air flow sensor can show up as a rough idle, hesitation or poor fuel economy. Before you replace it, rule out an intake air leak, a dirty air filter and a damaged connector, since any of them can also cause those complaints.
The 2012-2015 Honda Civic 4-cylinder 2.4L and the 2016-2018 Civic 4-cylinder 1.5L are among the vehicles this direct-fit OE replacement fits, and it is also a Honda CR-V mass air flow sensor for 2010-2019 models with the 4-cylinder 2.4L; each takes one sensor. If your car is not one of these, look up its year and engine in the "Vehicles it fits" section.
Fit and size
Build and materials
One mass air flow sensor. The housing is not included.
Interchange: 2-14681
37980R11A01 · 37980R11A02 · 37980R40A01 · 37980RLF003 · 37980RLF013 · MA1145
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is this the right Honda Civic mass air flow sensor for the 2012-2015 Civic 4-cylinder 2.4L and the 2016-2018 Civic 4-cylinder 1.5L?
Yes. Standard Ignition MAS0315 fits the 2012-2015 Honda Civic 4-cylinder 2.4L and the 2016-2018 Civic 4-cylinder 1.5L, and each takes one sensor.
Is Standard Ignition MAS0315 a mass air flow sensor for a 2012 Honda Accord with the 4-cylinder 2.4L?
Yes. It fits the 2008-2012 Honda Accord 4-cylinder 2.4L, which includes the 2012 model year, and the car takes one sensor.
Does the Standard Ignition MAS0315 mass air flow sensor include the housing?
No. Standard Ignition MAS0315 is the sensor only, and the housing is not included. This listing is one sensor.
What connector does this mass air flow sensor have?
It has one rectangular female connector with 5 male pin terminals. The sensor attaches with bolts through 2 bolt holes.
Can a check engine light mean the mass air flow sensor is failing?
Yes, it can, but other faults also turn the light on. A shop can read the codes and test the sensor's readings with the engine running.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.