Standard Ignition MAS0527 mass air flow sensor for the 2020-2025 Hyundai Venue 4-cylinder 1.6L and other vehicles measures the air entering the engine and reports it to the ECU. The ECU uses these readings to set the air/fuel ratio.
- 100% computer-tested for accurate airflow readings to the ECU under hard engine conditions
- Proprietary sensing elements give accurate airflow output across a wide range of ambient temperatures
- 100% new, with no leftover debris that can cause sensor failure
- Female oval plug-in connector with four male blade terminals
Quick facts
- Part: Standard Ignition MAS0527 mass air flow sensor
- Fits: the 2020-2025 Hyundai Venue 4-cylinder 1.6L and other vehicles
- Condition: New
A rough idle, hesitation or a check engine light can have several causes, a faulty mass air flow sensor among them. Before you replace the sensor, rule out an intake air leak or a loose connector, since either can produce similar symptoms.
Fits
This direct-fit OE replacement suits the 2020-2025 Hyundai Venue 4-cylinder 1.6L, the 2020-2023 Kia Rio 4-cylinder 1.6L and the 2017-2022 Hyundai Accent 4-cylinder 1.6L. This listing is one sensor, and the 2017-2022 Hyundai Accent 4-cylinder 1.6L takes one.
Specifications
Fit and size
- Quantity per vehicle: 1
- Number of bolt holes: 2
- Connector: 1 oval, female, plug-in
- Attachment method: push-on
Build and materials
- Terminals: 4 male blade
- Housing: included
- Condition: New
- Country of origin: Republic of Korea
In the box
One mass air flow sensor with its housing.
Interchange: 2-14865
MA1362 · 281642M320
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
MA1362, 2-14865, 281642M320, MAS0527
Frequently Asked Questions
Is this a mass air flow sensor for the 2017-2022 Hyundai Accent 4-cylinder 1.6L?
Yes. Standard Ignition MAS0527 fits the 2017-2022 Hyundai Accent 4-cylinder 1.6L, and that engine takes one sensor.
Can I use this as a mass air flow sensor for the 2020-2023 Kia Rio 4-cylinder 1.6L?
Yes. This mass air flow sensor is listed for the 2020-2023 Kia Rio 4-cylinder 1.6L, which takes one.
What kind of connector does the Standard Ignition MAS0527 have?
It has one oval, female plug-in connector with four male blade terminals. The sensor also has two bolt holes and a push-on attachment method.
Can a rough idle mean the mass air flow sensor is going bad?
It can be one sign, along with hesitation or a warning light. A shop can read the stored codes and test the sensor.
How is the Standard Ignition MAS0527 tested?
Each sensor is 100% computer-tested so the ECU receives accurate airflow readings under hard engine conditions. It is also extensively tested to OE specifications.
