Standard Ignition Park Assist Camera P/N:PAC207
Standard Motor Products
Standard Ignition PAC20 park assist camera for the 2013-2015 Ford Explorer gives the driver a camera view to help when parking.
A dead screen, a flickering image or a distorted picture can mean this camera is worn or has failed, though the wiring connector or the display screen can be behind the same signs, so find the cause before replacing the camera.
This park assist camera is a direct-fit OE replacement for the 2013-2015 Ford Explorer, which takes one.
Fit and size
Build and materials
Interchange: 864-062
PAN20 · PACA62 · PAW20 · DB5Z19G490A · EB5Z19G490A
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Does the Standard Ignition PAC20 park assist camera fit the 2013-2015 Ford Explorer?
Yes. Standard Ignition PAC20 is a direct-fit replacement for the 2013-2015 Ford Explorer, and the vehicle takes one camera.
Does this park assist camera need programming after it is installed?
No. The camera has a plug-and-play design, so no programming is required.
How many terminals are on the connector of the PAC20 park assist camera?
The Standard Ignition PAC20 has one connector with 6 pin terminals. The terminals are male and the connector is female.
Is DB5Z19G490A a number that matches the Standard Ignition PAC20?
Yes. That number is listed as an interchange for the Standard Ignition PAC20 park assist camera.
How do I tell a park assist camera is going bad?
Common signs are a screen with no picture, a picture that cuts out, or one that looks distorted. A shop can test the camera and its wiring for you.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.