Standard Ignition PAC250 rear park assist camera for the 2010-2011 Ford F-150 shows the driver the area behind the vehicle on the display.
- Female plug-in connector with six male terminals
- Blade and pin terminal types
- Extensive testing and validation for proper performance and reliability
Quick facts
- Part: Standard Ignition PAC250 park assist camera
- Fits: 2010-2011 Ford F-150
- Position: Rear
- Condition: New
A blank, distorted or flickering rear image can mean the camera has failed. Before you replace the camera, rule out a damaged connector or wiring, a dirty lens and a display fault; a shop can test the circuit. The 2010-2011 Ford F-150 takes one, at the rear.
Fits
This listing is one rear camera. It is a direct-fit OE replacement for the 2010-2011 Ford F-150, made for proper fit, form and function.
Specifications
Fit and size
- Position: Rear
- Quantity per vehicle: 1
- Connector quantity: 1
- Terminal quantity: 6
Build and materials
- Connector type: Plug in
- Connector gender: Female
- Terminal type: Blade; Pin
- Terminal gender: Male
- Condition: New
- Country of origin: United States
In the box
One park assist camera. A mounting bracket and storage case are not included, and an old bracket may not be reusable.
Installation notes
- Plug-and-play design; no programming is required.
Interchange: 864-079
PAN250 · PACA82 · PAW478 · AL3Z19G490A · BL3Z19G490B
This part cross-references / interchanges with the following part numbers:
PAN250, PACA82, PAW478, AL3Z19G490A, BL3Z19G490B, 864-079
Frequently Asked Questions
Does the Standard Ignition PAC250 fit the 2010-2011 Ford F-150?
Yes. Standard Ignition PAC250 is a direct-fit rear park assist camera for the 2010-2011 Ford F-150, which takes one at the rear.
Does this park assist camera come with a mounting bracket?
No. This listing is one camera; the mounting bracket and storage case are not included.
What kind of connector does the PAC250 rear camera use?
Standard Ignition PAC250 has one female plug-in connector with six male terminals, in blade and pin types.
Does the Standard Ignition PAC250 need programming after installation?
No. This camera has a plug-and-play design, so no programming is required.
Is AL3Z19G490A an interchange number for the Standard Ignition PAC250?
Yes. AL3Z19G490A is listed as a number the Standard Ignition PAC250 replaces, and it is printed on the Interchange line.
